Used Bottling, Filling & Packaging in Saitama, Japan

[Anko filling machine]

• Manufacturer: 株式会社 浜千(旧社名:浜千ミナモト株式会社)

Power supply: Three-phase 200V 50Hz | Rated current: 3.2A | Output: 0.75kW 2P | Discharge amount: When the pressure is 0.08MPa, 8T / hour

[Quantitative filling device (Mohno pump)]

• Manufacturer: 兵神装備株式会社

Power supply: Three phase 200V 50 / 60Hz | Motor: 0.75kW 4P | Outside size: Length 1480x width 800x height 1530 (mm) | Hopper size: Upper diameter: 755mm Depth: 730mm | Hopper capacity: About 50 liters | Transmi...

edhard New 60W type

• Manufacturer: edhard

Power supply: Single phase 100V | Electric power: 60W (excluding stirrer) | Outer dimensions of main unit (power base): 390 (W) x 230 (D) x 170 (H) (catalog specifications) (excluding hopper, cart, etc.) | Weigh...

Futaba Electric Industry Co., Ltd.FIITN-80-200

• Manufacturer: 双葉電機工業株式会社

Power supply: Single phase 100V 50Hz

JET NET JET HORN JH-20

• Manufacturer: JET NET

Outside size: Length 400x width 190x height 185 (mm) | Tip diameter: 70mm | Back diameter: 90mm | Use: Used for netting work such as grilled pork and roast beef by jet net. | Remarks: Made of all stainless steel...

DICK TWF-12 (9081200)

• Manufacturer: DICK

Capacity: 12 liter | Machine weight: Approx. 31 kg | Base plate (pedestal size): 400x260 (mm) | Outside size: Width 400x depth 590x height 720-1160 (mm) | Attached nozzle outer diameter: 12, 18, 22, 30 (mm) | Re...

Heishin Equipment Co., Ltd. NVL30PU-TF

• Manufacturer: 兵神装備株式会社

Power supply: Three-phase 200V | Required power: 0.75kw | Outside size: Length 1350 x Width 870 x Height 1600 (mm) | Discharge amount: 15 liter / min | Total head: 2kgf / square centimeter | Rotation speed: 165r...

Naomi Corporation PSH-2000

• Manufacturer: 株式会社ナオミ

Features : Two-cylinder type piston filling machine Easy to set the filling amount by touch panel Tube valve system Filling of high-viscosity material without destroying its shape

Hitec Corporation Staffwell 80 (STUFFWEL-80)

• Manufacturer: ハイテック株式会社

Outside size: Approx. W 1060 x D 730 x H 1620 (mm) | Machine weight: About 350kg | Power supply: Three-phase 200V | Power consumption: 6.55kW (manufacturer catalogue specs) | Maximum filling capacity: 3000kg/hou...

Naomi 10VC-A

• Manufacturer: ナオミ

Features: Completely self-priming is possible (no need to prime water). Just by inserting the tube into the material tank, the transfer starts immediately.

[Manual ham press machine]

Outside size: Width 125x depth 450x height 500 (mm) | Casing side diameter: 75mm

edhard MKHX

• Manufacturer: edhard

Power supply: Single phase 100V 50 / 60Hz | Electric power: 2A | Outside size: Width 390x depth 270x height 595 (mm) | Remarks: With plastic transparent hopper

Yanagear Negitro supply pump: PUC215

• Manufacturer: 株式会社ヤナギヤ

2961-1 air stuffer outer size: 400x600x1300 | 2961-2 negitro supply pump outer size: 500x800x1600

TIPPER TIE PR-465L

• Manufacturer: Tipper Tie
• Model: PR 465L

Outside size: Width 1240x depth 470x height 820 (mm) | Use clip size: TIPPER TIE: 400G, 401G | Features: Pull the end of the casing using air pressure, tighten well, and tie. | Use: Lose ham, boneless ham, turke...

edhard MKV

• Manufacturer: edhard

Power supply: Single-phase 200V @ 50 / 60Hz | Electric power: 1.2A | Features: Stainless steel hopper with lid | Use: Cream, bean paste, sauce, jelly, curry, sauces, butter, margarine, dough, ice cream, ingredie...