Used Shell And Tube Heat Exchangers in Netherlands

1972 Paasch & Silkeborg H-3575

• Manufacturer: Paasch & Silkeborg

Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm

2015 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

N.N. Tubular heatexchanger

• Manufacturer: N.N.

Non sanitary tubular heat exchanger for hot water preparation with steam. Multitube. 1 Compartment. Straight design. Length: 2,1 mtr. Outsie diameter 75 mm. Inside diameter: 7 tubes of 16 mm inner diameter. Conne...

1997 Sacome 1x1-TFMI-370-1-6''/18-6000-316L/316L-HARD

• Manufacturer: Sacome

Multitube Tubular Heat Exchanger. 37 tubes in 1 tube. Length 6 meter. Product side: 200 °C - 10,0 bar - 44,08 liter - Margarine - Connection: 3'' Flange. Media side: 200 °C - 10,0 bar - 48,92 ltr - Water - Connec...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connectio...

1994 Wilhelm Deller KG 27197/1

• Manufacturer: Wilhelm Deller KG

Water = 6barr / 208C / 19 L - Steam = 6barr / 208C / 36L - 46.5kW

Tetra Pak Multitube

• Manufacturer: Tetra Pak

Tube heat exchanger, straight design multitube, length: 6mtr, 7 inner tubes with diameter 22 mm, outer tube coagurated. Outer tube diameter 113 mm. Capacity: 0,41 m2x7=2,9m2. With connections product in/out DN 80...

N.N. Monotube

• Manufacturer: N.N.

Monotube. 1 Tube with internal spiral. Length: 150 cm, outside diameter 70 mm, inside diameter 50 mm. Connections, product: DN50 Clamp and service: DN16, DIN.

1995 Tetra Pak Spiraflow TTF-38s/16c-3-1

• Manufacturer: Tetra Pak
• Model: TTF38

Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...

Stork DS 1525

• Manufacturer: Stork

Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.

APV 3HD672

• Manufacturer: APV - Gaulin

Scrape surface heatexchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure s...

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10 ...

2009 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

1989 Crepaco 1HRT-672

• Manufacturer: Crepaco

Scraped surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...