- Trusted Seller
Thermal Dynamics Plasma Cutter - Pakmaster 100xlp
- Manufacturer: Thermal Dynamics
Made In The Usa Name: Plasma Cutter | Arrival date: 07-08-2025 | Dimensions l x w x h (inches): 17 x 30 x 21 | Electrical: 3/50/60/230/460 | Weight (lb.): 160 | Available quantity: 1
$120 USDEuclid, OH - Trusted Seller
Thermal Dynamics Plasma Cutting System - Cutmaster 38
- Manufacturer: Thermal Dynamics
Name: Plasma Cutting System | Arrival date: 08-25-2025 | Dimensions l x w x h (inches): 26 x 15 x 18 | Electrical: 1/50/60/120/208/230/330 | Weight (lb.): 50 | Available quantity: 1 | Make year: 2005
$390 USDEuclid, OH 
THERMAL DYNAMICS,GCM-1000,AUTO CUT 200 PLASMA CUTTER
- Manufacturer: Thermal Dynamics
WILL ARRANGE SHIPPING WITH BUYER WEIGHT 560LBS MEASURING 42X36X55 What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photo...
- Trusted Seller
Thermal Dynamics CM6032 (5) PM6042 Stak Pak II Plasma Cutter System Assembly
- Manufacturer: Thermal Dynamics
Powered up But no torch to test No Whip or Torch 5 Stack System If this item ships as Flat Rate Freight please see details in Shipping tab
$840 USDMillersburg, IN 
THERMAL DYNAMICS,PAK-5XR,THERMAL ARC PLASMA CUTTING SYSTEM 440V 3PH
- Manufacturer: Thermal Dynamics
WILL ARRANGE SHIPPING WITH BUYER WEIGHT 240LBS MEASURING 28X32X48 What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photo...
$900 USDGalion, OH- Trusted Seller
Thermal Dynamics 100XT Ultra Cut High Precision Plasma Cutting System 35' Leads
- Manufacturer: Thermal Dynamics
Used, in Good Working Condition. Cables look like the cut head is 35' from this unit. Coolant hoses with black box is 14' from main unit. Comm wires are 20' long We do not have the means to fully test. If this it...
$4,250 USDMillersburg, IN Thermal Dynamics CM6030, PM6040 Plasma Cutter. 1/3PH, 230/460V - USED
- Manufacturer: Thermal Dynamics
USED Unit powered up, air flows out torch but unable to test. Powered up on 3PH 460V Thermal Dynamics CM6030, PM6040 Plasma Cutter. 1/3PH, 230/460V, 125PSI Item is guaranteed to not be DOA for replacement or refu...
$1,624 USDKawkawlin, MI- Trusted Seller
Thermal Dynamics DYNAPAK 4Xi 40 AMP Plasma Cutting System 220/230VDC 250VAC
- Manufacturer: Thermal Dynamics
“POWERED ON ; DID NOT TEST THE WELDING PART OF IT ,BUT SHOULD WORK. COMES WITH SOME TIPS. SEE PICTURES.” Thermal Dynamics DYNAPAK 4Xi 40 AMP Plasma Cutting System 220/230VDC 250VAC Thermal Dynamics DYNAPAK 4Xi 40...
$1,000 USDFleetwood, PA 
Thermal Dynamics Plasma Cutting System Mdl #: PAK5XR, 200/220v 1ph
- Manufacturer: Thermal Dynamics
- Model: PAK5XR
Thermal Dynamics Plasma Cutting System Model #: PAK5XR S/N: L62418AT8321A Primary Volts: 200/220V Single Phase
$875 USDCedarburg, WI- Trusted SellerAuction
Thermal Dynamics PakMaster 50 XL Plus Torch
- Manufacturer: Thermal Dynamics
Inspection January 19th - Bid Deadline January 20th - Removal January 21st
Lawrenceville, GAVisit Auction Website - Trusted Seller
THERMAL DYNAMICS CUTMASTER A40 PLASMA CUTTER 0571934
- Manufacturer: Thermal Dynamics
“MAY HAVE SOME SHELF-WEAR .” THERMAL DYNAMICS PLASMA CUTTER MODEL NO. CUTMASTER A40 SERIAL NO. 0571934 INPUT VOLTAGE - 208-230V RATED OUTPUT - 40A,20-60A CUTTING CAPACITY - 1/4" PIERCING CAPACITY - 1/2" DUTY CYCL...
$2,000 USDCoffeyville, KS - Trusted Seller
THERMAL DYNAMICS PLASMA CUTTER CUTMASTER 151 1-1/4" CUT CAPACITY 25-100 AMPS
- Manufacturer: Thermal Dynamics
“SHELF WARE” THERMAL DYNAMICS PLASMA CUTTER CUTMASTER 151 1-1/4" CUT CAPACITY 25-100 AMPS 208-230/ 600 VOLT 1- 3 PHASE AIR TYPE GAS 70 PSI 7.5 CFM MOTOR GUARD AIR FILTER M-26 35" X 13" X 16" OAL READ BEFORE BIDDI...
$1,800 USDCoffeyville, KS - Trusted SellerAuction
THERMAL DYNAMICS Cut master 101 Plasma Cutter 125 (psi) Max. Gas Pressure, 70 (psi) 400 ((scfh))
- Manufacturer: Thermal Dynamics
THERMAL DYNAMICS Cut master 101 Plasma Cutter 125 (psi) Max. Gas Pressure, 70 (psi) 400 ((scfh)) 20 amps. / 88 V to 80 amps. / 112 V, 460 V 34 amps. s/n. 04971487 (Loc. Bldg 38- Maintenance Shop-welding room)
Vaughan, CanadaVisit Auction Website - Trusted SellerAuction
THERMAL DYNAMICS Cut master 101 Plasma Cutter 125 (psi) Max. Gas Pressure, 70 (psi) 400 (scfh) 20
- Manufacturer: Thermal Dynamics
THERMAL DYNAMICS Cut master 101 Plasma Cutter 125 (psi) Max. Gas Pressure, 70 (psi) 400 (scfh) 20 amps. / 88 V to 80 amps. / 112 V, 460 V, 34 amps. (Loc. Bldg 38- Maintenance Shop-welding room)
Vaughan, CanadaVisit Auction Website - Auction
Thermal Dynamics PakMaster 50XL Plus, Plasma Cutting Power Source
- Manufacturer: Thermal Dynamics
With Gun, Ground Clamp, Power Cord. Rated Output: 96 Volts, 40 Amps @ 100% Duty Cycle, 325 Max OCV, Input: 208-460 Volt, 1/3 Phase, s/n: 090848A192701E, Approx. 13" x 18" x 19" Overall. Note: Handle Missing (1) M...
Blaine, MNVisit Auction Website
Tip: Enter manufacturer, model or keyword
