Used Processing in Poland

AIRPOL KT7

• Manufacturer: Airpol
• Noise level: 72 decibel

was built in 2015 in Poland by Przedsiębiorstwo Produkcji Sprężarek Airpol Sp. z o.o.. The machine, which is a modern, reliable and quiet source of compressed air, is an excellent choice for any industrial plant....

EKOTON PRODEKO-EŁK GK-8.230.20.H filter press

• Manufacturer: EKOTON PRODEKO-EŁK

was built in 2018 in Poland by PRODEKO-EŁK. The machine is used for the economic dehydration of sludge, based on the principle of filtering solids from the liquid. The slurry pumped in flows through chambers with...

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine

• Manufacturer: Demag
• Model: Ergotech

was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and ...

DEMAG ERGOTECH VIVA 800-400 injection moulding machine

• Manufacturer: Demag
• Model: Ergotech

was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colo...

RQ-ZH-120W automatic cartoning machine

was built in 2022 in China by Rich Packing Machinery Co., Ltd. The machine is used for the automatic packaging of blister packs, sachets, tubes and bottles into cardboard boxes with a maximum basis weight of 350 ...

TECHNO ZK

• Manufacturer: TECHNO

, built in Poland by TECHNO-Wrocław, is used for economical packaging of products in a very short time. We have two units of such machines for sale, the price shown in the advertisement is for one unit.

AMP VBF-60/60/100-1.5

• Manufacturer: AMP

was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long wo...

BATTENFELD BA 600 CDC

• Manufacturer: Battenfeld
• Model: BA 600 CDC

The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...

VICTOR MSZ 30

• Manufacturer: Victor

was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...

ZWUT PSK-1

• Manufacturer: ZWUT

was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...

GT85 GT 2000-3P ultrasonic cleaner

The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...

MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P

• Manufacturer: Mayer

of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...