Used Machine Tools in Saxony, Germany

PAGUS machine table

• Manufacturer: Pagus

Machine table PAGUS Base plate 250 x 270 mm Travel range 100 mm

PAGUS machine foot

• Manufacturer: Pagus

machine base, 4 pieces PAGUS 250x165x380 Support area: 250 x 165 mm, material thickness: 40 mm Centering holes: hole spacing: 195 mm, hole diameter: �� 16.5 mm used, tested!

FIXATOR machine feet

• Manufacturer: Pagus

Machine foot set (2 each), wedge feet, leveling shoe FIXATOR with leveling device 100 mm x 50 mm Anchor screw M20 2 each Used, tested!

PAGUS machine table

• Manufacturer: Pagus

Machine table PAGUS Base plate 320 x 250 mm Travel range 150 mm Folding crank handle

PAGUS machine table

• Manufacturer: Pagus

Machine table PAGUS Base plate 240 x 210 mm Travel range 85 mm Used, tested!

PAGUS machine slide

• Manufacturer: Pagus

Machine slide PAGUS with pivot bearing: Inner diameter: 27 mm, length: 18 mm 2x feet: 40 x 110 mm, hole spacing: 360 mm Dovetail guide: Width: 54 / 68 mm, height: 14 mm Used, tested!

PAGUS machine vice

• Manufacturer: Pagus

Machine vise PAGUS used, tested! Back wide: 140 mm | Cheek height: 50 mm | Span: 0...110 mm | Dimensions: 420 x 140 x 110 mm

PAGUS machine vice

• Manufacturer: Pagus

Machine vice with quick adjustment PAGUS Clamping width in 3 steps !

WMW machine vice

• Manufacturer: WMW

Machine vise WMW 160 mm used, tested! Back wide: 160 mm | Cheek height: 50 mm | Span: 0 - 190 mm | Dimensions: 455 x 160 x 135 mm

WMW machine vice

• Manufacturer: WMW

Machine vise WMW SND 125 used, tested! Back wide: 125 mm | Cheek height: 40 mm | Span: 0...100 mm | Dimensions: 350 x 130 x 105 mm

PAGUS machine vice

• Manufacturer: Pagus

Machine vise PAGUS on a graduated table Rotatable 360° Tiltable 50° Used, tested!

WMW twist drill

• Manufacturer: WMW

Twist drill WMW, WERK 81.0 HSS used, tested! Diameter: �� 81.0 mm | Cutting angle: 118�� | Cutting fabric: HSS | Morse taper: MK5 | Total length: 447 mm | A-ma��: 275 mm | Chip flute length: 245 mm | Dimensions (...

WMW twist drill

• Manufacturer: WMW

Twist drill WMW, WERK 58.0 HSS used, tested! Diameter: �� 58.0 mm | Cutting angle: 118�� | Cutting fabric: HSS | Morse taper: MK5 | Total length: 420 mm | A-ma��: 260 mm | Chip flute length: 225 mm | Dimensions (...

KENNAMETAL KTIP drill body

• Manufacturer: Kennametal

KTIP Drill Bit Base, Drilling/Countersinking Holder KENNAMETAL KTIP145R5SCF16M 2405281 Shank diameter: 16 mm, Shank length: 48 mm (Weldon shank) 3x Modular Drill Bits KSEM/KTIP KTIP1450HPM Drill Bit Base used, te...

IND-SPHINX�� Micro drill

Micro Drill Bits, Drill Bits, 50 Pieces IND-SPHINX PRECISION LIMITED D8352 D8352009001050000 0.90x10.50mm Other quantities upon request! New!