Used Machine Tools in Haifa, Israel

Hydraulic unit

Items link: http://pombit.com/en/machine/168 Hydraulic power unit, 2 pumps on one shaft, motion with 16HP electric motor. Oil tank Sizes 1300x560x400 mm. working condition. The item in the picture is not for sal...

3 - Hydraulic pistons

Items link: http://pombit.com/en/machine/160 3 - Hydraulic pistons See pictures, General Dimensions, In the gallery !

Hydraulic unit

Items link: http://pombit.com/en/machine/167 Hydraulic power unit, 2 pumps on one shaft, motion with 16HP electric motor. Oil tank Sizes 1300x560x400 mm. working condition. The item in the picture is not for sal...

CAT 1HM112M-2

• Manufacturer: Caterpillar

Items link: http://pombit.com/en/machine/407 Stainless steel centrifugal blower in excellent working condition, Inlet diameter - round opening 465 mm inside. Diameter of hole circle - 515 mm Accelerator face diam...

ITT DA-7

• Manufacturer: ITT

Items link: http://pombit.com/en/machine/31 diphragma valve , brand new made by ITT ASA 150 10 pce

QD-JF PUMP QD7.8-6.5JF

• Manufacturer: QD-JF PUMP

Items link: http://pombit.com/en/machine/304 Submerged Pump Lower shield diameter -180 mm In good working condition Class B Model-QD7.8-6.5JF

metal centrifugal polishing -

Items link: http://pombit.com/en/machine/177 metal centrifugal polishing Electric motor with transmission Diameter drum 410mm Drum length 700 mm Pivot diameter 30mm Dimensions Fatah in the drum 228x170 mm

Rolling machine

Items link: http://pombit.com/en/machine/445 Rolling machine In new condition, able to produce C and Z profiles from 100 mm to 300 mm, The machine includes - Ability to cut learning Punch on the line Very fast ...

Collector adapter for lathe

• Manufacturer: Durnero

Items link: http://pombit.com/en/machine/366 collets for lathe Made in England Adapter for lathe for fast work and precise work with collets Perfect return to the center after each opening. Quantity - 14 units Di...

1979 IKEDA RM - 1300

• Manufacturer: Ikeda
• Model: RM1300

Items link: http://pombit.com/en/machine/152 IKEDA Radial drill Diameter central column 320mm~ Working Condition - There are a number of problems in the electrical system. Spindle move 300 mm MK - 5 TAPER

DECA spot 5000

• Manufacturer: Deca

Items link: http://pombit.com/en/machine/432 Spot welder for car bodywork Welder in new condition, worked very little Includes accessory set and inverted hammer Made in Italy

TOS sn 40 c

• Manufacturer: TOS
• Model: SN 40

Items link: http://pombit.com/en/machine/424 1200 mm lathe Lathe in working condition Spacing distance - 1200 mm Rapid + automatic + threaded proper

Table glutina

• Manufacturer: Peddinghaus

Items link: http://pombit.com/en/machine/286 Table glutina Table glutina for cutting tin + round iron In working mode Cutting tin up to 5 mm thick Cutting round iron up to -11 mm thick Cutting depth - 120 mm Leng...

Hydraulic press

Items link: http://pombit.com/en/machine/128 Hydraulic press Without hydraulic unit. Thickness of the upper plate 95. Bottom plate thickness 27 mm. Diameter piston rod 70 mm. Diameter hole in the bottom plate 350...

RIDGID 535

• Manufacturer: Ridgid
• Model: 535

Items link: http://pombit.com/en/machine/28 Pipe Threader Machine, working condition, oil pump is for lubrication thread is not working. 220 v. Maximum thread 2" , including wheel stand.