Processing » Heat Exchangers » Hiroshima

Building Filters

33

Used Heat Exchangers in Hiroshima, Japan

Multitubular heat exchanger
- used
2 passes. Since there is no documentation, the heat transfer area cannot be determined without removing the mirror and investigating the diameter x number x length of tubes.
Hiroshima, Japan
Multitubular heat exchanger
- used
Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One
Hiroshima, Japan
Multitubular heat exchanger
- used
Heat transfer area: Under investigation (10m2?) Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Multi-tube heat exchanger, vertical type
- used
Heat transfer area: 4.7 m2 Tube: inner diameter 30mm, length 1240mm Number of tubes: 40 tubes, 400φ, single mirror SUS Heat transfer area: 4.7 m2
Hiroshima, Japan
［Carbon multi-tube heat exchanger (vertical type)
- used
Heat transfer area: 4.9 m2 Tube: inner diameter 25 mm, length 2000 mm Number of tubes: 31 1-pass specification Heat transfer area: 4.9 m2
Hiroshima, Japan
2003 [Maeda Iron Works] Multi-tube heat exchanger
- used
- Manufacturer: 前田鉄工所
This heat exchanger cools and condenses vapor generated by a vacuum concentrator (3000-4000 kg/hour evaporation rate). External dimensions: Approx. 1000mm diameter (excluding legs) x 4200mm high, Weight: Approx. ...
Hiroshima, Japan
1991 Carbon capacitor
- used
Heat resistance temperature: 360°C Withstand pressure: 0.5MPa(75PSIG) Heat Transfer Area: Unknown (Approx. 10㎡ based on size)
Hiroshima, Japan
SSC RC456SK-42-9
- used
- Manufacturer: SEC
Cubic type Heat transfer area: 1.12 m2 Material: carbon | Quantity saved: One
Hiroshima, Japan
［Carbon capacitor No model
- used
Heat transfer area: Unknown (about 10 square meters based on the size). Other: Unknown (because there is no nameplate).
Hiroshima, Japan
SEC FK-22-10
- used
- Manufacturer: エスイーシー
Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- used
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
1996 Iwai Machine GHX
- used
- Manufacturer: Iwai Machinery
Plate material: SUS316 Heat transfer area: 85.8m2 Flow rate: 100m3/h(MAX) Heat resistance: 150°C Number of Plates：CH①62 CH②42 CH③30
Hiroshima, Japan
1998 Hisaka Manufacturing UX-016A-KNJR-8
- used
- Manufacturer: Hisaka Seisakusho
Heat transfer area: 0.5m2 Material: Wetted part SUS | Quantity saved: Two
Hiroshima, Japan
1997 Izumi Food Machinery NB36SS-163-6-HWW
- used
- Manufacturer: Izumi
Plate material: SUS316 Heat transfer area: 56.52m2 13500L/h Number of plates: CH①77, CH②72, CH③14
Hiroshima, Japan
［Tokai Carbon] Carbon capacitor No model
- used
- Manufacturer: Tokai carbon
Heat transfer area: 5.9m2 Quantity saved: 1
Hiroshima, Japan

12 3