Test, Lab, Medical equipment » Test Generators

Search By Manufacturer

Search By Country

Building Filters

16

Used voltage detectors

  • Trusted Seller
    Wavetek 15484

    Wavetek 15484

    • Manufacturer: Wavetek

    Wavetke 15484 Detector simulator - provides accurate calibration voltages to the NS20 network analyzer.

    Cary, NC
  • Agilent/Keysight 83558-60003

    Agilent/Keysight 83558-60003

    • Manufacturer: Agilent - Keysight

    For leveled output power across the frequency sweep, an external 10 dB directional coupler directs a portion of the RF signal to a detector.. The detector produces a voltage proportional to the sampled RF signal....

    Farmingdale, NJ
  • Agilent/Keysight 1617A

    Agilent/Keysight 1617A

    • Manufacturer: Agilent - Keysight

    The General Radio 1617A is a reconditioned Capacitance Bridge that is completely self-contained, including a 120 Hz generator, null detector, DC polarizing-voltage supply, and metering for bias voltage & leakage ...

    Farmingdale, NJ
  • Agilent/Keysight N5500A

    Agilent/Keysight N5500A

    • Manufacturer: Agilent - Keysight
    • Model: N5500A

    The Agilent N5500A Phase Noise Test Set is part of the E5505A Phase Noise Measurement System. The N5500A performs phase noise measurements with the addition of baseband analyzers and software. Carrier frequencies...

    $19,500 USD
    Farmingdale, NJ
  • Agilent/Keysight 11666A

    Agilent/Keysight 11666A

    • Manufacturer: Agilent - Keysight
    • Model: 11666A

    Reflection measurements covering from 40 MHz to 18 GHz with one directional device can be made with the Model 11666A Reflectometer Bridge. Operation of this type of directional device is based on principles of th...

    Farmingdale, NJ
  • Biddle/AVO 653031

    Biddle/AVO 653031

    • Manufacturer: Biddle/AVO

    Biddle® impulse generators are designed to locate faults in power cable by the high voltage impulse method, in which a high-voltage impulse is transmitted down the cable to cause the fault to arc. The arcing faul...

    Farmingdale, NJ
  • Agilent/Keysight 117A

    Agilent/Keysight 117A

    • Manufacturer: Agilent - Keysight
    • Model: 117A

    The HP Model 117A VLF Comparator makes accurate phase comparisons between the 60-kc signal transmitted by the National Bureau of Standards at Fort Collins, Colorado (WWVB) and a local frequency standard. Using Mo...

    Farmingdale, NJ
  • Trusted Seller
    Advantest D3286

    Advantest D3286

    • Manufacturer: Advantest
    • Model: D3286

    SDH/SONET Frame Synchronization Suitable for SystemEvaluation Burst Data Measurement Effective for Round-Trip Testing Error Location Function to Locate Error Bits Error Rate Measurement Function with Area Specifi...

    New Smyrna Beach, FL
  • no-image_en.png

    Melles Griot 13AMP003

    • Manufacturer: Melles Griot

    The 13 AMP 003 large-dynamic-range amplifier is a general purpose current amplifier for use with photodiodes and other detectors in applications requiring the transimpedance configuration. The compact unit conver...

    Farmingdale, NJ
  • no-image_en.png

    Agilent/Keysight HMMC-5634-BLK/TR1

    • Manufacturer: Agilent - Keysight

    The HMMC-5634 is a high power, low-loss, directional detector with a capacitor and resistors on an integrated diode chip. It is fabricated using the MB6A process. An external DC blocking capacitor is required in ...

    Farmingdale, NJ
  • no-image_en.png

    Agilent/Keysight 423A

    • Manufacturer: Agilent - Keysight
    • Model: 423A

    The HP model 423A crystal detector is 50Ω (nominal) devices designed for measurement use in coaxial systems. The instruments convert RF power levels applied to the 50Ω input connector into proportional values of ...

    Farmingdale, NJ
  • Advantest D3286

    Advantest D3286

    • Manufacturer: Advantest
    • Model: D3286

    Advantest D3286 Details Advantest D3286 Digital Transmission Tester 12GB/S ERROR RATE DETECTOR SDH/SONET frame synchronization suitable for system evaluation Error detection with area specification effective for ...

    Lake Mary, FL
  • Advantest D3286-70

    Advantest D3286-70

    • Manufacturer: Advantest
    • Model: D3286/70

    Advantest D3286-70 Details Advantest D3286-70 The D3286 Error Detector offers excellent waveforms with high speed and high quality and diverse error detecting functions in an operating frequency range from 150 Mb...

    Lake Mary, FL
  • Anritsu MP1763B-01

    Anritsu MP1763B-01

    • Manufacturer: Anritsu
    • Model: MP1763B

    This Generator is used in combination with the MP1764A Error Detector. The amplitude of the clock and data signals can be varied from 0.25 to 2 Vp-p while the offset can be adjusted to within ±2 V so that the amp...

    Webster, MA
  • FLUKE PM5139 PM5139/001 FUNCTION GENERATOR

    FLUKE PM5139 PM5139/001 FUNCTION GENERATOR (IN26S2)

    • Manufacturer: Fluke
    • Model: PM5139

    “We are selling this unit for parts but it is powering on and probably only needs calibration.” FLUKE PM5139 PM5139/001 FUNCTION GENERATOR (IN26S2)

    $576 USD
    Rathdowney, Ireland
12

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.