Test, Lab, Medical equipment » Test Generators

Search By Manufacturer

Search By Country

Building Filters

16

Used provision

  • Amplifier Research ATL80M1G

    Amplifier Research ATL80M1G

    • Manufacturer: Amplifier Research
    • Model: ATL80M1G

    SPECIFICATIONS BEAM WIDTH (average) Frequency range: 80 - 1000 MHz | Power gain (over isotropic): 6.5 dBi minimum, 7.5 dBi average | Gain flatness: ± 1.0 dB | Impedance: 50 ohms nominal VSWR | Maximum: 1.8 | Aver...

    $1,795 USD
    Farmingdale, NJ
  • Trusted Seller
    Tektronix 191

    Tektronix 191

    • Manufacturer: Tektronix
    • Model: 191

    Hybrid circuit with both valves and transistors. The ‘constant amplitude’ just means that there's no provision for amplitude modulating the signal. In fact, these signal generators can be used as sco...

    Cary, NC
  • Trusted Seller
    Tektronix TSG3

    Tektronix TSG3

    • Manufacturer: Tektronix
    • Model: TSG3

    TSG3 Linearity Generator Plug-In The Tektronix TSG2 Convergence Generator Plug-In provides high-quality convergence test signals for the 1410 NTSC Generator Mainframe. You can use it to determine picture monitor ...

    Cary, NC
  • Trusted Seller
    Tektronix TSG13

    Tektronix TSG13

    • Manufacturer: Tektronix
    • Model: TSG13

    TSG13 Linearity Generator Plug-In The Tektronix TSG12 Convergence Generator Plug-In provides high-quality convergence test signals for the 1411 PAL Generator Mainframe. You can use it to determine picture monitor...

    Cary, NC
  • Trusted Seller
    Wavetek 1001A

    Wavetek 1001A

    • Manufacturer: Wavetek
    • Model: 1001A

    500 kHz to 300 MHz Sweep Generator The Wavetek 1001A Sweep Generator Covers from 500 kHz to 300 MHz. Sweep width from 200 kHz to 300 MHz. Maximum output of +13 dBm. Harmonics of 30 dB below output; spurious non-h...

    Cary, NC
  • Trusted Seller
    Keysight 3499B

    Keysight 3499B

    • Manufacturer: Agilent - Keysight
    • Model: 3499B
    • Frequency range: 0.02 GHz

    2 Slot Switch / Control Mainframe The 3852A is a Data Acquisition/Control Unit. You can easily configure a 3852A data acquisition and control system to meet your needs for measuring physical parameters. The 3852A...

    Cary, NC
  • Trusted Seller
    Agilent 3499B

    Agilent 3499B

    • Manufacturer: Agilent - Keysight
    • Model: 3499B
    • Frequency range: 0.02 GHz

    2 Slot Switch / Control Mainframe The 3852A is a Data Acquisition/Control Unit. You can easily configure a 3852A data acquisition and control system to meet your needs for measuring physical parameters. The 3852A...

    Cary, NC
  • Trusted Seller
    no-image_en.png

    Wavetek 1067

    • Manufacturer: Wavetek
    • Model: 1067
    • Frequency range: 0.4 GHz

    Provides features tailored to the CATV industry 1 to 400 MHz frequency range in one band +10 to -60 dBm output range ±0.25 dB flatness 30 dBc above 10 MHz spurious content 75 Ω impedance Sweep rate: continuously ...

    New Smyrna Beach, FL
  • Trusted Seller
    no-image_en.png

    Wavetek 1801B

    • Manufacturer: Wavetek
    • Model: 1801B
    • Frequency range: 0.5 GHz

    1 to 500 MHz, 450 to 950 MHz dual bands Ultra-flat (±0.35 dB, 1 to 950 MHz) 75 Ω system is calibrated from +57 to -33 dBmV 200 kHz to 500 MHz sweep widths Output continuously adjustable in 10 dB steps plus a 20 d...

    New Smyrna Beach, FL
  • Tektronix 191

    Tektronix 191

    • Manufacturer: Tektronix
    • Model: 191

    Tektronix 191 Details Tektronix 191 TEKTRONIX 191 Constant Amplitude Signal Generator R.F. signal generator (350kHz-100MHz). Hybrid circuit with both valves and transistors. The ‘constant amplitude just means th...

    Lake Mary, FL
  • Wavetek 1067

    Wavetek 1067

    • Manufacturer: Wavetek
    • Model: 1067

    Wavetek 1067 Details Wavetek 1067 The 1067 Sweep Generator operates in the frequency range from 1 to 400MHz in one band. Output range from +10 to -60 dBm. Flatness of ?0.25 dB. Spurious content of 30 dBc above 10...

    Lake Mary, FL
  • Wavetek 1001A

    Wavetek 1001A

    • Manufacturer: Wavetek
    • Model: 1001A

    Wavetek 1001A Details Wavetek 1001A The 1001A Sweep Generator Covers from 0.5 to 300MHz. Sweep width from 200kHz to 300MHz. Maximum output of +13 dBm. Harmonics of 30 dB below output; spurious non-harmonics of 40...

    Lake Mary, FL
  • Wavetek 1067/SP522

    Wavetek 1067/SP522

    • Manufacturer: Wavetek
    • Model: 1067

    Wavetek 1067/SP522 Details Wavetek 1067/SP522 The 1067/SP522 500MHz Sweep Generator operates in the frequency range from 1 to 400MHz in one band. The instrument is tailored to the CATV industry. Output range from...

    Lake Mary, FL
  • Wavetek 2002

    Wavetek 2002

    • Manufacturer: Wavetek
    • Model: 2002

    Wavetek 2002 Details Wavetek 2002 The 2002 Sweep Generator is a broadband frequency generator which can sweep any portion of the 1 to 2500MHz band in 4 bands. Four bands are provided to ensure flexibility plus op...

    Lake Mary, FL
  • Wavetek 1801B

    Wavetek 1801B

    • Manufacturer: Wavetek
    • Model: 1801B

    Wavetek 1801B Details Wavetek 1801B The solid-state 1801B Sweep/Signal Generator provides features that are ideally suited for use with CATV equipment. Includes dual bands: 1 to 500MHz, 450 to 950MHz The ultra-fl...

    Lake Mary, FL
12

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.