Test, Lab, Medical equipment » Test Generators

Building Filters

2274

Used waveforms

  • Trusted Seller
    GW Instek GFG-8210

    GW Instek GFG-8210

    • Manufacturer: GW Instek
    • Model: GFG-8210

    Function Generator, 10MHz Frequency range max.: 10.0MHz | Waveform outputs: Sine, Square, Triangle, Ramp, TTL, CMOS | Modulation: LIN/LOG Sweep

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B8110

    Protek B8110

    • Manufacturer: Protek

    Wide 0.01Hz to 10MHz frequency range Log/Lin sweep Burst /gate and triggered modes Output may be FM modulated using the VCG input Low distortion Sine wave Sweep start and Stop capability 10 MHz Sweep Function Gen...

    New Smyrna Beach, FL
  • Trusted Seller
    GW Instek SFG-2107

    GW Instek SFG-2107

    • Manufacturer: GW Instek
    • Model: SFG-2107

    DDS Technology and FPGA Chip Design Frequency Range:0.1Hz 7 MHz High Frequency Accuracy : ± 20ppm High Frequency Stability : ± 20ppm Frequency Resolution :100mHz Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz Front...

    New Smyrna Beach, FL
  • Trusted Seller
    Wavetek 182A

    Wavetek 182A

    • Manufacturer: Wavetek
    • Model: 182A

    Frequency Accuracy 5 % Maximum Output Voltage 10 V Output Impedance 50 Ohm Modulation FM,VCG Trigger Modes Gate,Trigger Function Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B803

    Protek B803

    • Manufacturer: Protek

    Seven frequency ranges with 100:1 control on each range Built-in 2MHz, 4 digit frequency counter Less than 2% sinewave distortion Variable symmetry DC offset and Voltage Controlled Frequency input TTL sync output...

    New Smyrna Beach, FL
  • Agilent/Keysight M9502A

    Agilent/Keysight M9502A

    • Manufacturer: Agilent - Keysight
    • Model: M9502A

    The M9502A AXIe Chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the chassis managemen...

    Farmingdale, NJ
  • Trusted Seller
    Tektronix AFG3011

    Tektronix AFG3011

    • Manufacturer: Tektronix
    • Model: AFG3011

    10 MHz, 25 MHz, 100 MHz, or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms Amplitude up to 20 Vp-p into 50 Ω loads 5.6" Display for Full Confidence in Settings and Waveform Shape ...

    New Smyrna Beach, FL
  • Trusted Seller
    GW Instek GFG-8255A

    GW Instek GFG-8255A

    • Manufacturer: GW Instek
    • Model: GFG-8255A

    Function Generator,5MHz -20dBx2 Frequency range max.: 5.0MHz | Waveform outputs: Sine, Square, Triangle, Ramp, TTL, CMOS | Modulation: AM, FM, Sweep, INT/EXT

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix AFG3022B

    Tektronix AFG3022B

    • Manufacturer: Tektronix
    • Model: AFG3022B

    10 MHz, 25 MHz, 100 MHz, or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms Amplitude up to 20 Vp-p into 50 Ω loads 5.6" Display for Full Confidence in Settings and Waveform Shape ...

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix AFG3021B

    Tektronix AFG3021B

    • Manufacturer: Tektronix
    • Model: AFG3021B

    10 MHz, 25 MHz, 100 MHz, or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms Amplitude up to 20 Vp-p into 50 Ω loads 5.6" Display for Full Confidence in Settings and Waveform Shape ...

    New Smyrna Beach, FL
  • Tektronix AWG2041

    Tektronix AWG2041

    • Manufacturer: Tektronix
    • Model: AWG2041

    The Tektronix AWG2041 is a 1GS/sec Arbitrary Waveform Generator. Performance Characteristics Form Factor Benchtop Number of Channels 1 ch Waveforms (Sine, Square, etc.) Arbitrary,Pulse,Ramp,Sine,Square,Triangle M...

    $1,250 USD
    Farmingdale, NJ
  • Trusted Seller
    Protek B8010FD

    Protek B8010FD

    • Manufacturer: Protek

    Built with highly stable and reliable Direct Digital Synthesis technology Sine, Square, Pulse, Triangle, Ramp, Sine [x]/x, Exponential up, Exponential down and Noise waveforms All models have a dual output with a...

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B8040FD

    Protek B8040FD

    • Manufacturer: Protek

    Built with highly stable and reliable Direct Digital Synthesis technology Sine, Square, Pulse, Triangle, Ramp, Sine [x]/x, Exponential up, Exponential down and Noise waveforms All models have a dual output with a...

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B8020FD

    Protek B8020FD

    • Manufacturer: Protek

    Built with highly stable and reliable Direct Digital Synthesis technology Sine, Square, Pulse, Triangle, Ramp, Sine [x]/x, Exponential up, Exponential down and Noise waveforms All models have a dual output with a...

    New Smyrna Beach, FL
  • Trusted Seller
    Wavetek 188

    Wavetek 188

    • Manufacturer: Wavetek
    • Model: 188

    Frequency Accuracy 5 % Maximum Output Voltage 10 V Output Impedance 50 Ohm Modulation FM,VCG Sweep Modes Linear,Log Trigger Modes Gate,Trigger,Sweep DC Offset w/Calibrated Zero VCG Function Generator

    New Smyrna Beach, FL
89101112

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.