Used splitters

Narda 4436-8

• used

• Manufacturer: Narda

Narda 4436-8 Eight Way Power Divider Specifications:

Agilent/Keysight 5086-6449

• used

• Manufacturer: Agilent - Keysight

The Directional Bridge assembly and the power splitter/dierctional bridge assembly are not field-repairable but they are replaceable on an exchange basis at a considerable cost saving.

Agilent/Keysight 54007A

• used

• Manufacturer: Agilent - Keysight
• Model: 54007A

The 54007A Accessory Kit provides an assortment of precision terminations, adapters, and other devices with 3.5mm connectors for low-loss measurements. These devices have been specifically designed for precision,...

Agilent/Keysight 87303C

• used

• Manufacturer: Agilent - Keysight
• Model: 87303C

The Keysight 87303C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports. It has insertion loss between the main line and output p...

Agilent/Keysight N5532A

• used

• Manufacturer: Agilent - Keysight
• Model: N5532A

The N5532A is intended to be used with the N5530S Measuring Receiver System. It is essentially a power sensor with the power splitter at the input. In use, the sensor module’s two output cables are connected to a...

ANTENNA LDCBS1X2

• used

• Manufacturer: ANTENNA

GPS Passive Antenna Splitter 1X2 1100MHz- 1700MHz The LDCBS1X2 GPS Splitter is a one input, two output device based on the Wilkinson splitter design. The frequency response covers the GPS L1 & L2 bands with excel...

Agilent/Keysight 1167A

• used

• Manufacturer: Agilent - Keysight

HP 1167A Power Splitter Cal: Calibration Available | As-is: Unit Sold AS-IS

Anaren 100024-3

• used

• Manufacturer: Anaren

Anaren 100024-3 Power Splitter/ Combiner Cal: Calibration Available | As-is: Unit Sold AS-IS

Agilent/Keysight 11667C

• used

• Manufacturer: Agilent - Keysight
• Model: 11667C

The Agilent 11667C power splitter is recommended when making wideband ratio measurements using an Agilent 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the a...

Agilent/Keysight 11667D

• used

• Manufacturer: Agilent - Keysight

The Keysight 11667D power splitter is a two-resistor type power splitter that provides excellent output SWR at the auxiliary arm when used for source leveling or ratio measurement applications. The tracking betwe...

Anritsu V241C

• used

• Manufacturer: Anritsu
• Model: V241C

These microwave power splitters are symmetrical, two-resistor designs that can be used in applications where signals from DC to 65 GHz must be accurately divided for ratio measurements. They provide excellent fla...

Agilent/Keysight 11667L

• used

• Manufacturer: Agilent - Keysight

The Keysight 11667L is a 50-ohm two-resistor type power splitter with BNC connectors. It is used with the E5061B network analyzer for power distribution network applications, such as DC-DC converter output impeda...

Teseq ISN T8-Cat6

• used

• Manufacturer: Teseq - Schaffner

Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Mini-circuits ZFSC-2-11-S+

• used

• Manufacturer: Mini-Circuits

Picosecond PSPL5333

• used

• Manufacturer: Picosecond

The PSPL5333 is a 6dB 25GHz Power Divider with an ultra-broadband resistive coupler, which provides even division of an input signal at the output ports. The device exhibits excellent through-line insertion loss ...