Used sensor in Wallonia, Belgium

Mixing and transport screw, 1350/120mm

External dimensions: length 2350mm, width 300mm, height 300mm Motor: 1,1 KW, 380 V, brand BAUER, 50 Hz, type drive motor, 44 rpm With sensor for rotation control

2006 Green sand mixer WEBAC with accessory, 28 t/h

• Manufacturer: Webac

The capacity depends on the quality of the bentonite and of the sand Three-phase-motor, type 280M4 2 mixing runners Accessories: -water control SENSOR CONTROL FRS-M -sand scale -elevator -injection system

1999 Bizerba GmbH & Co. KG, Germany EM-TB-300

• Manufacturer: Bizerba

paper weighing system BIZERBA EM-TB 300 of 1999 n°1688812, scale with stand (load sensor) - max. 6 kg for POLAR cutting line

Furan sand screw mixer BORDEN, ± 5-10 t

External dimensions: length 3400 mm, width 1250 mm, height 2200mm Between axe input and exit 1700 mm Ø of the tube 240 mm Comannd over automat TELEMECHANIK TSX2720 With pneumatic slide With sensor on the cover

Electrical treatment furnace POTTERYCRAFTS, 74 cm x 44 cm x 65 cm, 1300 °C, CE

Type: 0210, serial number: 6.544 11 kW, 220 /380 V With control cabinet: main switch, switch for opening the door, new Jumo digital readout control, new sensor

2000 Pneumatic sand transport SNE-RONOT 250 l

Construction year: 2000, weight: 350 kg Useful Ø 650 mm Capacity 250 l On 3 feet With pneumatic clap With 2 sensors Input sand Ø 200mm, output sand Ø 70mm

1989 Dust conveyor FAT 75 l

Serial number: 1142, construction year: 1989 Air entrance 1'' Input sand Ø 150mm, output sand Ø 100mm With 2 sensors, the complete exhaust valve for dust is in good condition Sand output from above, out of basin ...

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

1998 Alu melting furnace tiltable, 315 kg, MORGAN, natural gas

• Manufacturer: Morgan

Motor ALMA, 2,2 kW, 220/380 V With hydraulic unit With gas pressure regulator and gas burner ELCO type EK3.60 G-ZVA 20 With podium and stair ,with temperature sensor Max. thermal output 500 kW With crucible type ...

1994 tumble belt Shotblastmachine with rubberbelt and one turbine, brand TOSCA

External dimensions: 1900 mm x 1300 mm, h. 3600 mm (with elevator) With electrical box, elevator SEVER 0,8 kW, 220 V, 1400 rpm With automat Siemens S5 - 100 U CPU 100 With sensor for door closing With gear motor ...

Dosing srew, Ø 50 mm, with hopper

Year of construction: 1990, weight: 140 kg Motor BAUER, type 022-10/DK94241K, 1,1 kW, 99 rpm (exit), 220/380 V, brake motor With inductive rotation measuring sensor With agitator for the product flow The scew ove...

Double floor type grinder DÜRRSCHMIDT, Ø 760 mm x 80 mm

1 transversal axis motor SCHNEIDER, type; MJPP180MR4, serial number: 808820 22 kW, 220/380 V, 1450 rpm With 3 speeds by stepped pulley With sensor on the back of the visit door 2 exhausts, Ø 135 mm, Stone Ø 800 m...

1972 Pneumatic sand transport 250 l, RONOT

Serial number: 16083, construction year: 1972 Max operating pressure 4 bar Max operating temperature 25°C Pneumatic clap (valve) Sensor with 2 flaps at the entrance Sand input Ø 145 mm, sand output Ø 70mm Capacit...

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...