Used Extruders

1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder

• Manufacturer: PTI

1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox is a Flender m...

1960 4000 Ton Soutwark Extrusion Press #2160714

• Manufacturer: Southwark

SPECIFICATIONS: 4000 Ton Soutwark Extrusion Press * 4000 ton * Max billet size 12" x 38" * Die stack is 20" x 23.5" * Modern die shuffle * Oilgear pumps PVV200 * 300HP Motors * Hydraulics upgraded in 2010 (cost $...

Leistritz Twin Screw Pelletizing Line, model Micro18-GG

• Manufacturer: Leistritz

Leistritz Twin Screw Pelletizing Line, model Micro18-GG Used Leistritz twin screw pelletizing line, model Micro18-GGL, 18 mm screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, wa...

Welex 4.5" Pelletizing Line

• Manufacturer: Welex

The Welex 4.5" Pelletizing Line is a comprehensive recycling solution designed for efficient material processing. It features a 4.5-inch diameter vented barrel with a length-to-diameter (L/D) ratio of 36:1. Equip...

54" Welex 5 Layer Extrusion Sheet Line

• Manufacturer: Welex

54" Welex 5 Layer Extrusion Sheet Line Used 54" Welex 5 layer sheet line consisting of the following: Mcguire blender feeder (1) 3.5" Welex extruder, 36:1 l/d, vent with dc motor and screen changer. (2) 2.5" W...

1.5" Killion Extrusion Line

• Manufacturer: Killion

1.5" Killion Extrusion Line Used 1.5" Killion extruder, model KN-150, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section, 15 hp, 1750 rpm dc motor, 11.2:1 gearbox ratio, Cross head coating di...

6" Gloucester Water Ring Pelletizing Line

• Manufacturer: Gloucester

6" Gloucester Water Ring Pelletizing Line Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed h...

84" Rosenthal Sheeter, Model WAS-7-IBZEA-24

• Manufacturer: Rosenthal

84" Rosenthal Sheeter, Model WAS-7-IBZEA-24 Used 84" Rosenthal Sheeter, Model WAS-7-IBZEA-24, 2000# unwind stand, regular cut, razor slitting, serial# 80776, built 1999.

144" Vinyletech Abbottstown Vacuum Table, model D9056-12

• Manufacturer: VINYLETECH ABBOTTSTOWN

144" Vinyletech Abbottstown Vacuum Table, model D9056-12 Used 144" Vinyletech Abbottstown vacuum table, model D9056-12, approximately 144" long x 22" wide x 12" deep, with vacuum pump and circulation pump, serial...

Sica Cleated Belt Puller, Model C110.2

• Manufacturer: Correa

Sica Cleated Belt Puller, Model C110.2 Used Sica cleated belt puller, model C110.2, approximately 4.75" wide x 32" long contact area, 208 volt, serial# 9849301, built 1998.

85 Cu Ft (2,400 Liter) Welex Cooler, Model 2400 HC, S/S

• Manufacturer: Welex

85 Cu Ft (2,400 Liter) Welex Cooler, Model 2400 HC, S/S Used 85 cu ft (2,400 liter) Welex cooler, model 2400 HC, stainless steel construction, with bolt on paddles, belt driven by 30 hp, 230/460 volt motor, (4) a...

60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000

• Manufacturer: Battenfeld
• Model: Gloucester

60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000 Used 60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000 This used 60" Battenfeld Gloucester three-roll vertical sheet sta...

Zumbach Surface Fault Detector, Model KW20

• Manufacturer: Zumbach

Zumbach Surface Fault Detector, Model KW20 Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 7142.0006.

Beta LaserMike Gauge, Model 179

• Manufacturer: Beta LaserMike

Beta LaserMike Gauge, Model 179 Used Beta LaserMike gauge, model 179-550, .0300 - 5.5" size range, on stand, serial# 97-351, built 1997.

Stainless Steel Vertical Pellet Cooler

Stainless Steel Vertical Pellet Cooler Used 52" diameter Vertical pellet cooler, stainless steel construction, (16) total trays with (13) jacketed. As Is.