Used in Zürich, Switzerland

2008 Mercedes-Benz 325 CDI
- Manufacturer: Mercedes-Benz
- Gross weight: 3,500 kilogram
The van can also be sold fresh from MFK for a surcharge.
$14,358 USD
Zürich, Switzerland
2007 Iveco 35S12 Daily
- Manufacturer: Iveco
- Model: DAILY 35S12
- Horsepower: 120 horsepower
- Gearbox type: Manual
Kilometre: 318,284 km | Transmission: manual gearshift | Power: 120 PS | Agriculture: 06.2020 | Seats: 2 | Lxb bridge: 4.10m x 2.08m | Tire profile front & rear: 50% / 50% | Payload: 1060 kg | Capacity: 2286 ccm...
$8,053 USD
Zürich, Switzerland
2000 Weber TRC 85
- Manufacturer: Weber
- Model: TRC
- Horsepower: 20.9199445859634 horsepower
- Hours: 653 hour
Operating hours: 653h | Operating weight: 1410 kg | Engine power: 17.2 kW | Engine type: LDW 903 | Comment: Trench roller works perfectly and is ready for use. Can be inspected and tested.
Zürich, Switzerland
1985 OMC Mustang 445
- Manufacturer: Mustang
- Model: 445
- Hours: 2,700 hour
Type of vehicle: skid steer loaders | Hours: 2700h | Length: 3 m | Width: 1,71 m | Height: 2,05 m | Mass: 3350 kg | Comment: Machine has been freshly painted. Works perfectly. Skid steer loader has bucket and fo...
Zürich, Switzerland
1985 Caterpillar D4E
- Manufacturer: Caterpillar
- Model: D4E
- Horsepower: 75 horsepower
- Hours: 4,550 hour
Hours: 4550 | Power: 55 kW | Mass: 10800 kg | Sign: 3.5m | Engine: 4 Cylinder Turbo Diesel 3304
$16,231 USD
Zürich, Switzerland
Auction
2011 Potain MDT 98 Top Slewing Crane
- Manufacturer: Potain
- Model: MDT 98
- Capacity: 1,200 kilogram
- Maximum lift height: 54.3 meter
Last crane inspection (CH) on 11.07.2025 Details in documents
Winterthur, Switzerland
Visit Auction Website
1997 FASTENER ENGINEERS DTVA 2050-36
- Manufacturer: Fastener Engineers
RMG 910 in-line wire drawer from 2003 in top condition. The 900 mm capstan delivers strong traction for drawing up to 15.6 mm mild steel or 14.1 mm high tensile, and RMG’s Wire Relaxer with AUTODRAW automatic spe...
Zürich, Switzerland
2003 RMG 910-2563-21
- Manufacturer: RMG
RMG 910 in-line wire drawer from 2003 in top condition. The 900 mm capstan delivers strong traction for drawing up to 15.6 mm mild steel or 14.1 mm high tensile, and RMG’s Wire Relaxer with AUTODRAW automatic spe...
Zürich, Switzerland
1987 HILGELAND CH 1 NH
- Manufacturer: Hilgeland
Photos and detailed information are available upon request. Please contact us directly for further assistance
Zürich, Switzerland
1965 HILGELAND ME4
- Manufacturer: Hilgeland
Photos and detailed information are available upon request. Please contact us for further assistance.
Zürich, Switzerland
1986 HILGELAND PN-4
- Manufacturer: Hilgeland
Max. ø when rounding and drilling (mm): 12 | Max. ø when pointing (mm): 10 | Max. shaft length (mm): 180 | Max. pieces per minute: 180
Zürich, Switzerland
1985 HILGELAND PN-4
- Manufacturer: Hilgeland
Max. ø when rounding and drilling (mm): 12 | Max. ø when pointing (mm): 10 | Max. shaft length (mm): 180 | Max. pieces per minute: 180
Zürich, Switzerland
1970 HILGELAND PN-6
- Manufacturer: Hilgeland
Max. ø when rounding and drilling (mm): 20 | Max. ø when pointing (mm): 16 | Max. shaft length (mm): 180 | Max. pieces per minute: 90
Zürich, Switzerland
1976 INGRAMATIC PA 2
- Manufacturer: Ingramatic
Photos and detailed information are available upon request. Please contact us for further assistance.
Zürich, Switzerland
1977 SASPI GV4/30
- Manufacturer: SASPI
Max. ø (mm): 14 | Max. thread height (mm): 100 | Max. shaft length (mm): 120 | Max. pieces per minute: 160
Zürich, Switzerland