Used robot in Switzerland

INDUSTRIAL ROBOT “STÄUBLI” TYPE RX60

• Manufacturer: STAEUBLI

with controller CS7 – 6 axes

INDUSTRIAL ROBOT “MITSUBISHI” TYPE RV-2SDB

6 axes, with controller CR1DA-771-S15

2014 HERMLE C 42 U

• Manufacturer: Hermle
• Model: C 42 U
• Control: HEIDENHAIN TNC 530

Control: HEIDENHAIN TNC 530 | Number of axis total: 5 | Table length: 400 mm | Table width: 400 mm | Number of t-channels: 5 | T-channel width: 14H7 mm | Table load max.: 450 kg | Maximum swing circle of up to: ...

2023 INDEX G 420

• Manufacturer: Index
• Control: SIEMENS 840 D Solution Line

Control: SIEMENS 840 D Solution Line | Number of turning spindles: 2 | Number of milling heads: 1 | Number of revolvers: 2 | Number of positions turret 1: 12 | Number of positions turret 2: 12 | Spindle nose hsk...

2000 DIGMA 500 GC

• Manufacturer: DIGMA
• Control: HEIDENHAIN Atek HS Plus

Control: HEIDENHAIN Atek HS Plus | Number of axis total: 3 | Table length: 550 mm | Table width: 450 mm | Number of t-channels: 5 | Distance of the t-slots: 80 mm | T-channel width: 18 mm | Longitudinal travel (...

2010 DMG DMC 55H duoBLOCK

• Manufacturer: DMG Mori
• Model: DMC 55 H DUOBLOCK
• Control: HEIDENHAIN iTNC 530

Control: HEIDENHAIN iTNC 530 | Time under power: 75886 Heures | Operating time: 27052 Heures | Number of axis total: 4 | Number of spindles: 1 | Table load max.: 500 kg | Longitudinal travel (x-axis): 560 mm | T...

2008 MAKINO V 33i Graphite

• Manufacturer: Makino
• Model: V33I Graphite
• Control: MAKINO PROFESIONAL 5

Control: MAKINO PROFESIONAL 5 | Time under power: 124789 Heures | Operating time: 41099 Heures | Working time: 33577 Heures | Spindle run time: 37924 Heures | Number of axis total: 3 | Table length: 750 mm | Tab...

Fanuc Robodrill a-D21MiA5 I Vertical Machining Center

• Manufacturer: Fanuc
• Model: Robodrill α-D21MiA5
• Spindle Taper: CAT 30
• Control: Fanuc 31i-B5

We hereby offer this used Fanuc Robodrill a-D21MiA5 vertical machining center from 2014, located in Switzerland. Fitted with the advanced Fanuc 31i-B5 control unit, it offers seamless control and optimization for...

Deckel Maho DMU 50 Evolution I Vertical Machining Center

• Manufacturer: Deckel / Maho
• Model: DMU 50 EVOLUTION
• Spindle Taper: SK40
• Control: Heidenhain TNC 430

We hereby offer this used Deckel Maho DMU 50 Evolution vertical machining center from 2005, located in Switzerland. Equipped with the advanced Heidenhain TNC 430 control unit, it ensures precise and efficient ope...