Used separators in Japan

1973 Tomoe Kogyo P-3400

• Manufacturer: Tomoe kogyo

30kW 4000rpm/3200G Gear ratio: 1/165 Spare rotor included (gear ratio: 1/52) Click here for a video of the test run (YouTube) after maintenance was completed.

1989 Matsumoto Machinery Works MARK III 48 × 30

• Manufacturer: Matsumoto Machinery Works

Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G

Tanabe Willtech Z-2L (overflow type)

• Manufacturer: Tanabe Willtech

Main: 3600rpm/3000rpm BD: 3030rpm/2530rpm Differential speed: 10rpm/8.2rpm With spare screw Applications: Suitable for sludge dewatering.

Sato S-401G

• Manufacturer: Sato

Bore diameter: 40mm Head: 11.5M Liquid flow rate: 110L/min

Kotobuki Industry S3-0

• Manufacturer: Kotobuki Industry

22kw (explosion-proof motor) 1300～2200rpm 1300G 【Maintained Processing capacity: 5-10m3/H Serviced in 2014 -> In indoor storage Overlay thermal spraying is not performed. Please consult with us.

2006 Kotobuki SC-170

• Manufacturer: Kotobuki

Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...

Tikara Engineering 60 × 25 1/2 type

• Manufacturer: Tikara Engineering

Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...

There is no nameplate 24 吋

• Manufacturer: No nameplate

Basket SUS Casing SS + SUS (side) Upper discharge type The entire disassembly and maintenance is performed at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the exter...

A spiral pump

Confirmation required. Note: No inventory number. (1) Place to put.

Nishikaki pump UFS

• Manufacturer: Nishikaki pump

Discharge rate: 0.05 m3 / min Power: 2.2kw | Material: Wetted SUS 304 | Quantity saved: One

1979 HISAKA Manufacturing BFL 7 - 2050

• Manufacturer: Hisaka

Motor: 11 kw Material: SUS 316 Bore size: 65 × 50 Head: 20M Flow rate: 0.5 m3 / min

1991 Sanwa MFD

• Manufacturer: Sanwa

SUS 1.5 kw suction / discharge: caliber 25/20 mm Discharge amount: 1 m 3 / h, head height: 15 m

1999 Tomoe Kogyo PTM300

• Manufacturer: Tomoe kogyo

4000 rpm/3250 rpm, approximately 3000G Four units with a 1/165 gear ratio, one unit with a 1/125 gear ratio Backdrive specification (can be modified to single-motor) 1999, 2000, 2004 (two units), and 2007 models ...

1999 Tanabe Wiltec O-24

• Manufacturer: Tanabe Wiltech

Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L

2000 Tanabe Wiltech DAC-30

• Manufacturer: Tanabe Wiltech

30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L