Used separators in Belgium

Laboratory treatment furnace RESCAL, 1200 °C

• Manufacturer: RESCAL

With thermostat up to 1200 °C With timer With ventilation and alarm, can be switched on separately

Sand silo, divided in 2; ±6m³

Silo divided into 2 with 2 separate outlets On 3 feet

Dust filter 105.000 m³/h MÜNSTERMANN

• Manufacturer: MÜNSTERMANN

560 filter hose Filter with 2 separate filter bodies Possibility for pressure less cleaning 400V; 3ph; 50Hz With spark separator With pneumatic shut-off dampers With pneumatic cleaning With screw discharge With 2...

Vertical screw conveyor, Ø 5500 mm

Able to work vertically It is carried by trapezoid without reducer It can be separated in the middle In very good condition

Reclaiming plant for furan sand, 5 t/h

• Manufacturer: G.U.T. /CYRUS

consisting of: - shake out, 2350 mm x 1850 mm, with cabinet - vibrating conveyor - magnet separator (overbelt) - bucket elevator - silo 50 t - attrition unit CYRUS, motor 5,5 kW, 400 V, 960 rpm - oscillating scre...

Sand silo 35 m³

Cone 2400 x 500 mm With framework not very high Without extraction belt which is sold separately

Sandbunker 35 m³

Cone length 500 mm Sith framework not very high Without extraction belt which is sold separately

1992 Amine Gas Washer BGT, 20 000 m³/h

With collection tray With exhaust With coarse separator, 2m x 2m x 1,6m

Hanger-type shot blast plant DISA BMD VP18

Type: VP18G-ST 8T338, serial number: KA 603689 Motor UNELEC, 220/380 V With 3 turbines Ø 380 mm, 15 kW each Cabin with 2 double motorized doors With run-through hooks inside the cabin 1 t max For parts max. Ø 140...

Induction furnace INDUCTOTHERM 20t and 25t

• Manufacturer: Inductotherm

With 2 water pump stations (for furnace and control cabinet) With 2 cooling towers (closed cooling circuits) With 1 hydraulic unit with separate pumps With 1 ABB transformer With 1 control cabinet for both furnac...

1990 Tumble belt shot blast machine, GF CT2

In very good condition With 2 turbines, 30 KW each Max unit weight: 60 kg; max Ø: 500 mm With magnetic and wind separator

Loading band, 3500 mm x 500 mm

External dimensions: length 4000 mm, width 1450 mm, hauteur 2150 mm With small loading hopper, on feet V-belt drive, separated gear box

Refrigeration dryer compressed air 485 m³/h

• Manufacturer: RDM

Type: 0485/ID, serial number: 1100714468 Year of construction: 1997, weight: 219 kg Max. 16 bar, input and exit 1" 1/2 with one water separator

1989 Semi-automatic moulding plant HWS-HSP-2

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

2009 Tumble belt shotblasting machine RÖSLER RMBC 6.2

• Manufacturer: Rösler

Dimensions: Length: 2800mm; Width: 2250mm; Height: 3870mm inside dimensions: Ø1200mm; width: 1200mm 55kW; 400V; 50Hz With double magnetic separation With pneumatic sand feeder KLEIN; 75l With vibro separating con...