Used separators in Baden-Württemberg, Germany

2012 New Holland Varifeed Schneidwerk 9,15m + Biso TW | Bj. 2012

• Manufacturer: New Holland

Hectare: 3000 ha | Rape separator, left: hydraulic | Rape separator, right: hydraulic | Width of cutting unit: 9,15 m

B&D T-Type Ø 3.200

• Manufacturer: B & D

Used upflow classifier made by B&D in the size Ø 3,200mm. Ideal for the production of sands with a required exact grading curve. Both dry and wet feeding is possible with this machine. The separating cut of the c...

Ratzinger DO 5014Z

Used screening machine of the manufacturer Ratzinger type DO5014Z as a cross clamp. The screening machine is sold including springs, spring blocks and drive unit with 15 kW electric motor. Manufacturer: Ratzinger...

2001 BSA Vacuum drum

• Manufacturer: BSA

Compressed air brake system: Yes | Hydraulically foldable: Yes | Filling amount: 14000 l | Pumping capacity: 11800 l/min | Tyre equipment: 700/50 R26.5 | Construction type: Vacuum | Suction line: 150 mm | Drip s...

2024 FRECH W200Zn-ST

• Manufacturer: Frech

Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...

1995 FRECH DAW 200S

• Manufacturer: Frech

Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...

1999 FRECH DAM 315 S

• Manufacturer: Frech

Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...

2003 Frech Espana DAW 125 PD SBC3

• Manufacturer: Frech

Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant

2024 FRECH W20Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...

1994 FRECH DAW 50

• Manufacturer: Frech

Used machine DAW 50 as a basis for a general overhaul without control cabinet, without oven and oven cabinet A general overhaul can be carried out at the manufacturer's overhaul plant. The scope of the overhaul c...

1992 FRECH DAW 50

• Manufacturer: Frech

Used die casting machine DAW 50 with SBC2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic sp...

2020 FRECH W50Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.1 Locking part cover on the base frame 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4...

2024 FRECH W80Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...

2000 FRECH DAW 80S

• Manufacturer: Frech

Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.

Fixed Angle rotor Fiberlite F21S-8x50y out of Carbon fiber

Fixed Angle rotor Fiberlite F21S-8x50y out of Carbon fiber (Cat.-# 096-084018), 8x50 ml, 29x105 mm, for Sorvall RC-2/RC-5/RC-6/RC-26 series and Evolution RC, max. 21.000 rpm, 53.440 g, 4,2 kg, with Liquid Contain...