Used materials testing in Flanders, Belgium

A083: Aggregate crushing value apparatus dia.75mm

Aggregate crushing value apparatus dia.75mm Standard: comparable to BS 812:110 Comprising 75 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 57 mm diameter x 90 mm deep. Used for ...

CA408 Crack width gauge for walls (5 pcs)

Crack width gauge for walls (5 pcs), range 50 mm readings per mm

C187 K-Slump tester

K-Slump tester

Installation and training on site by producer

Installation and training on site for èe Four Point Bending Beam Testing System

Calibration Load Measuring up to 3000kN

Calibration Load Indicating Device up to 3000 kN The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited according ...

A121 Rock cradle to ASTM D5873

• Manufacturer: Matest

Rock cradle to use with C381 rebound hammer Standard: ASTM D5873 It is the equippement used to locate EX or NX core rock specimens during the classification test by the Rock Hammer model C381. Weight: 20 Kg

Calibration ISO 17025 Load Measuring up to 200 kN

Calibration under ISO17025 accreditation of a Load Ring up to 200kN. Certificat by a accredited laboratory after payment. The calibration/testing services offered in this quotation are performed by European Lab S...

Calibration Rebound Hammer

Inspection with calibration of a Rebound Hammer Certificate is available after paiment of invoice The device must reach your Sint-Niklaas offices through your services. We can arrange for transport after calibrat...

A081-01 : Lightweight aggregates crushing resistance

Lightweight aggregates crushing resistance Standard : EN 13055-1 METHOD 1 Apparatus for the determination of the crushing resistance of lightweight aggregates having diameter from 4 to 22 mm, and a volumic mass o...

B024 : Permeameter

Permeameter Mainly used in situ to perform and to check the permeability and drainage on road carpets, concrete pavements, tamped earth etc. The test consists in filling the cylinder with water, after ermetically...

Calibration Proctor Mould Small diam 100

• Manufacturer: Proctor

Calibration of a Proctor Mould: diameter and height The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited accordi...

Calibration Pull off Tester

Calibration for a Pull off tester with one channel under ISO17025 accreditation 327-CAL The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. Europea...

Calibration SRT Skid Tester

Calibration Sieve

Inspection and calibration of a woven sieve to 3.55 mm opening in accordance with ISO-3310. Includes traceable report (sent after payment of invoice). The sieves must be clean for calibration and assembled.

Calibration Rebound Hammer type P

Inspection with calibration of a Rebound Hammer type P/PT Without spare parts (to determine during inspection) Certificate is available after paiment of invoice The device must reach your Sint-Niklaas offices thr...