Used materials testing in Shanghai, China

Pressure Transmitter XY-PTMT300

Minimum Diameter 10mm And 5mm Phickness, Maximum Pressure 100MPa Small size, IP65 or IP67 Ingress protection; applied in aerodynamics, aircraft and engine experiment, wind tunnel experiment, hydromechanics experi...

WaveTopSign Model YL-S-3 Desktop CO2 Laser Power Meter 0-200W Input Voltage AC 220V

• Manufacturer: WaveTopSign

Fast response, high accuracy. Efficient thermal probe can measure a wide spectral range measurements. Receiving area with good uniformity. Water-cooled is suitable for measurements for long time. Company Informat...

WaveTopSign Muti-Wave 11nm-19000nm CO2 Laser Tube Power Meter 2W For Laser Engraving and Cutting Machine

• Manufacturer: Muti

Features: 1. One button clear, accurate measurement 2. The probe can move up and down the bracket for easy measurement 3. No need to switch wavelength, 11nm~20000nm can be measured Parameters: 1. Measurement obje...

Enameled Wire Resistance Tester

• Manufacturer: Trihope

• Detect enameled wire conductor resistance and resistivity • To set two kinds of materials and to meet market demand. • The results will appear on LCD touch screen. According to the sample resistance to select g...

Enameled Wire Resistance Tester

• Manufacturer: Trihope

• Detect enameled wire conductor resistance and resistivity • To set two kinds of materials and to meet market demand. • The results will appear on LCD touch screen. According to the sample resistance to select g...

GNGPL-BS1363 Plugs Socket Outlets Gauges for BS1363 of British Standard

• Manufacturer: Lisun

Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to BS 1363 standards. And the mainly application industries is electroni...

GNGPL-CEI23 Plug and Socket Outlets Gauges for CEI 23-50 of Italy Standard

• Manufacturer: CEI

LISUN GNGPL-CEI23 Italy Standard Plug and Socket Outlets Gauges is mainly used to test and inspect whether the structure and size of plugs and sockets conform to CEI 23-50 standard. LISUN GNGPL-CEI23 application ...

GNGPL-UL498 Plugs and Socket Outlets Gauges for UL 498 of American Standard

• Manufacturer: Lisun

Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to UL 498:2012 standards. And the mainly application industries is elect...

AC-3M 3m Anechoic Chamber

Specification: System Configuration 3m Anechoic Chamber (Download Brochure) 5m Anechoic Chamber (Download Brochure) Anechoic Chamber frame dimension 9.5*6.5*6.3m 12*7.6*6.6m Frame and specification (Quantity) H-s...

GNGPL-CEE7 Plugs and Socket Outlets Gauges for CEE 7 of Central and Eastern Europe Standard

• Manufacturer: Lisun

Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to CEE7 ( CEE7/7 ) standards. And the mainly application industries is e...

GNGPL-ASNZS Plugs and Socket-Outlets Gauges for AS/NZS 3112 of Australia and New Zealand Standard

• Manufacturer: Lisun

Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to AS/NZS 3112: 2017 standards. And the mainly application industries is...

GNGPL-5402A 5A Withdrawal-Pull Gauge for Effectiveness of Contact Dia. 0.199 in. 8 oz of BS 546 Figure 2

• Manufacturer: Lisun

The gauge is able to measure the effectiveness of the contact diameter, which is 0.199 inches, using a withdrawal-pull method. The gauge is designed with a capacity of 8 ounces and follows the specifications of B...

GNGPL-5751 Go Gauges and Not Go Gauges of EN 50075 Figure 1

• Manufacturer: Lisun

Application: Go Gauges and Not Go Gauges of EN 50075 Figure 1 are used to test and inspect the structure and size of plugs and sockets conform to EN 50075 ( BS EN 50075:1991 ) standards. And the mainly applicatio...