- Auction
Kenco 1-1/4 Ton OBI Punch Press on Stand
W/ Die Plate. 5" x 4" Cap. Rapid Air Model A2 Feeder. 5" x 6" Opening in Back. Overall: 24" x 20" x 58".
Hastings, MNVisit Auction Website - Trusted Seller
Brake
- Manufacturer: LASERMET
GOOSENECK (USED) PUNCH 110" LONG 12.750" WORK HEIGHT 1.080" FACE WIDTH (APPROX.) 85 DEGREES EQUIPPED WITH - SAFETY TANG - STAND WITH FORK POCKETS
Molex 69002-5001 Punch Press 120V 60HZ 8A
- Manufacturer: Molex
Molex Part/Model Nbr: 69002-5001 Punch Press 120 VAC 60 HZ 8 AMP With Foot Switch - See Pics Unit Was Tagged "Intermittent Feed Issue" ****** NOTE FOR PARTS &/OR REPAIR ****** %%%%%%%%%% NO RETURN OF THIS ...
$1,500 USDBurnsville, MN- Auction
Press Dies on Steel Rack
Lot 177 Press Dies on Steel Rack Main unit approx weight: 0.00 lbs | Main unit dimensions (in inches): Length: 52.00" Width: 32.00" Height: 66.00" | Dock door: 12' x 14' H Door Ground Level Doors | Loading dock...
Plymouth, MNVisit Auction Website 
Haeger Hardware Insertion Press Tooling 103720 Step Pin ABFT Singulation Assy
- Manufacturer: Haeger
Haeger Hardware Insertion Press Tooling 103720 Step Pin ABFT Singulation Assy Haeger Hardware Insertion Press Tooling 103720 Step Pin ABFT Singulation Assy Click images to enlarge Description INV 3796 These were ...
Savage, MN- Auction
112 and Marathon 112, Turret Punch Tooling, (3) Lista Cabinets with Maple Top Loaded with Tooling
- Manufacturer: Lista
Lot 301 112 and Marathon 112, Turret Punch Tooling, (3) Lista Cabinets with Maple Top Loaded with Tooling Equipped With Full Cabinets, divided Neatly
Plymouth, MNVisit Auction Website - Trusted Seller
WA WHITNEY 790-084
- Manufacturer: Whitney
- Model: 790-084
WHITNEY (USED) 100 TON FLANGE PRESS 100 TON 4-1/4" THROAT 1-3/8" STROKE 1-1/4" MAX HOLE 10 HP 700 464 MODEL POWER UNIT SERIAL NO. 700-464-18353
- Trusted Seller
DURMA TP123
- Manufacturer: Durma - Durmazlar
- Model: TP123
DURMA (NEW) MODEL TP123 TURRET PUNCH 33 TON CAPACITY 98.5" + R X AXIS MOVEMENT 49.2" Y AXIS MOVEMENT WITH SINGLE TOOL 15 FPM X AXIS SPEED 10 FPM Y AXIS SPEED 18 FPM LATERAL SPEED X + Y 1.6" MAIN CYLINDER STROKE 1...
Dodge Center, MN - Trusted Seller
- Trusted Seller
- Trusted Seller
1988 WA WHITNEY 1524
- Manufacturer: Whitney
WHITNEY (USED) MODEL 1524 CNC FABRICATOR 50 TONS PUNCHING FORCE PUNCHING CAPACITY -MILD STEEL - 50,000 PSI SHEAR STRENGTH - 1-1/4" DIAMETER THROUGH 1/2" - 2" DIAMETER THROUGH 3/8" - 3" DIAMETER THROUGH 1/4" - 4" ...
- Trusted Seller
DURMA TPL 93
- Manufacturer: Durma - Durmazlar
DURMA (NEW) MODEL TPL 93 TURRET PUNCH 33 TON CAPACITY O FRAME TYPE 118" + R X AXIS MOVEMENT 59" Y AXIS MOVEMENT WITH SINGLE TOOL 393.7" AUTOMATIC REPOSITIONING RANGE 2362.2 IN/MIN SPEED OF Y AXIS 2755.9 IN/MIN SP...
Dodge Center, MN - Auction
Minster No 5
- Manufacturer: Minster
- Model: NO 5
- Capacity: 45,000 kg
- Stroke length: 101.6 mm
Lot 89 Minster No5 OBI Punch Press, 45 Ton, Single Crank, FLywheel, Air-Clutch, Dual Palms Equipped With Air-Clutch and Brake, Inch/Single/ Continuous Controls, Dual Palm Buttons, Air Surge Tank, 3 HP
Plymouth, MNVisit Auction Website - Auction
Turret Maintenance Parts and Hardware for Weidemann C3000 in 8 Drawer Cabinet
- Manufacturer: Weidemann
Lot 282 Turret Maintenance Parts and Hardware for Weidemann C3000 in 8 Drawer Cabinet
Plymouth, MNVisit Auction Website 
1959 Minster Model 7 75-Ton Punch Press
- Manufacturer: Minster
1965 Minster Punch Press Model No. 7 Serial No. 11750 Capacity - 75 Ton Stroke of Slide - 4" Area of Bed - 36" x 22" 40 Strokes per Minute (variable ABB ACS 600 attached, but no keypad) 19" wide rear ope...
Tip: Enter manufacturer, model or keyword