Used Materials Testing in Flanders, Belgium

S234-KIT Sand density cone apparatus 6,5"

Sand density cone apparatus 6,5" Used to determine the in-situ density of fine graned compacted soil. The test consists in digging a hole into the ground and then collect, dry and weight the sampled soil. The hol...

A081-01 : Lightweight aggregates crushing resistance

Lightweight aggregates crushing resistance Standard : EN 13055-1 METHOD 1 Apparatus for the determination of the crushing resistance of lightweight aggregates having diameter from 4 to 22 mm, and a volumic mass o...

B024 : Permeameter

Permeameter Mainly used in situ to perform and to check the permeability and drainage on road carpets, concrete pavements, tamped earth etc. The test consists in filling the cylinder with water, after ermetically...

Calibration Proctor Mould Small diam 100

• Manufacturer: Proctor

Calibration of a Proctor Mould: diameter and height The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited accordi...

Calibration Pull off Tester

Calibration for a Pull off tester with one channel under ISO17025 accreditation 327-CAL The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. Europea...

S165-02 KIT Cone penetrometer, semiautomatic, digital

Cone penetrometer, semiautomatic, digital

Calibration Vibrating Table and Sieve Shaker

Calibration Vibrating Table Control of Fraquency and Falling Height wiè certificate after payment

Calibration Ring and Ball Softening Point

Calibration Ductilometer one lc

Calibration Ductilometer Apparatus with one load cell

Calibration Cover Meter rebar

Calibration Rebound Hammer

Calibration Autom Vicat Apparatus: weight and dimensions

Calibration Vicat Apparatus

Calibration Autom Penetrometer on Bitumen

Calibration Automatic Penetrometer on Bitumen

Lightweight penetrometer ZLR-10

Lightweight penetrometer ZLR-10 according to DIN EN ISO 22476-2:2005 (DPL) (before DIN 4094) and TP BF-StB Teil B 15.1(DPL-5) > includes: 1 x Pile driver (10 kg) 1 x Anvil 1 x Guide bar with handle 6 x Plumb with...

Digital Crack width gauge with data connection

digital gap meter with wireless data connection sensor range +/- 80 mm d = 0,003mm incl.met air temperature data logger wireless data connection or USB connection The Wireless Crack Movement Recorder provides con...

A083: Aggregate crushing value apparatus dia.75mm

Aggregate crushing value apparatus dia.75mm Standard: comparable to BS 812:110 Comprising 75 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 57 mm diameter x 90 mm deep. Used for ...