- Trusted Seller
2014 Bay Shore System LōDril DH30
used
- Manufacturer: Bay Shore
LōDril DH30; 18,000lb first layer line pull capacity kelly winch; Carrier: Komatsu PC290-LC10; Estimated Transport Weight: 83,000lbs; 6 element (5 telescoping) square kelly bar set; 66" Crowd stroke; Level and de...
- Trusted Seller
2024 Bay Shore System TR95 QUICK DOCK
used
- Manufacturer: Bay Shore
Call for Pricing: Quick Dock Functionality, Carrier Weight: 79,000 lbs, Attach. Weight: 21,000 lbs., Hydraulic interface panel configured for mounting to a New Komatsu PC360-LC11; level and depth indicator; power...
Texas, USA - Trusted Seller
- Trusted Seller
2022 VERMEER PD5R
used
- Manufacturer: Vermeer
- Model: PD5R
Rotating platform/driver, Wireless Remote, Auto Plumb Feature, With Trimble LR410 receiver, 48Hp Cat C2.2 4 Turbo Diesel Tier 4 final, 12 in Rubber Tracks Maximum pile height – 15′ Travel Speed of 2.4mph.
- Trusted Seller
2023 23 Vermeer PD10R #25083
used
- Manufacturer: Vermeer
- Model: PD10R
Wireless Remote, Auto Plumb Feature 49Hp Deutz 2.9l Turbo Diesel Tier 4 final, 16” Rubber road liner track pads, 20’ high mast, Travel Speed of 1.7mph.
2018 Klemm 702-2R
used
- Manufacturer: Klemm
Low-hour limited access micropile drill PRICE REDUCED! This is a very nice compact drill capable of installing high-capacity micropiles in very limited access settings. With 1,000mm of stroke, this rig can work i...
2017 Watson 3110 CM
used
- Manufacturer: Watson
One-owner, low-hour rig! Price just reduced AGAIN! Double reduction mechanical rotary w/ 120,000 ft-lbs of torque 2-element friction Kelly with 80-ft max depth (hollow inner) 5″ stub Controlled free-fall winch wi...
2015 CZM EK200sm
used
- Manufacturer: CZM
Short-mast EK200 ready to work. This is the CZM EK200 in low clearance application. The 6-element interlocking kelly will reach depths in excess of 90′. With manufacturer stated torque of over 167,000 ft-lbs, thi...
2009 Klemm 702-2
used
- Manufacturer: Klemm
Great for limited access! Great limited-access micropile drill This is a very nice, compact drill capable of installing high-capacity micropiles in very limited access settings. Thew Unit starts and runs All func...
2010 Watson 3260 CM
used
- Manufacturer: Watson
Beefy, torque monster of a rig! Rig is dependable and in every day operations Swing motors mounting plate recently replaced by Watson Final drive recently repaired by Watson Transmission gone through early 2023 N...
1996 Texoma Taurus XLT
used
- Manufacturer: Texoma
- Model: TAURUS XLT
120-ft Max drill depth Price Reduced Job-ready rig 120-ft max drill depth 150,000 lb-ft of torque 8.3 L Cummins engine 2,003 hours put on by current owner 7-in sub, slot pin Triple square Kellies
2016 Casagrande B160XP
used
- Manufacturer: Casagrande
- Model: B160XP
2016 Casagrande B160XP with only 956 hours of use (as of August 2020) Very nice 2016 Casagrande B160XP. S/N B160US0100. This is a beautiful rig that will give you years of service. It has a Tier 4 Engine, 4 secti...
2007 IMT AF130
used
- Manufacturer: IMT
120-ft digger! AF130 drill rig w/ J-lock 120-ft 4-element Kelly bars Mounted on a CAT 324DLN w/ CAT 7 series engine w/ 175HP at 1,800 RPM Current engine hours of 10,823 The AF130 has 86,295 ft-lbs of rotary torqu...
2002 LoDril LLMHT-40R
used
- Manufacturer: LoDril
Good running LoDril on 330BL This LoDril LLMHT-50R was assembled by Bay Shore in 2002 on the 2000 CAT 330BL. The round-locking bar set was a 4-element 50′ drill depth , but has been converted to a 3-element 40′ d...
1991 Watson 3000
used
- Manufacturer: Watson
- Model: 3000
Good condition rig with 70-ft max drill depth. This Watson 3000 is mounted on a 1991 HME 880-DOH. The rig has a max drill depth of 70 ft, wedge pin, 6-in and 8-in Kellies, and a 6-in sub. Total running hours on t...
Vermeer PD10R Piling Rig
used
- Manufacturer: Vermeer
- Model: PD10R
Good condition Vermeer PD10R Piling Rigs manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword