Used Tanks & Kettles in Bremen, Germany

1000 liter tank, Aisi 304

remarks: Manhole diameter approx. 440 mm (manhole cover is loose); tank with small dents

2440 liter tank, Aisi 304

max. allowable working temperature: 60 °C remarks: 2 loose, height-adjustable bearing shells, Aisi 304; 1 manhole approx. 345 x 440 mm in the front bottom; partially 1 lifting eyelet on top of the tank; Inner len...

3500 liter tank, Aisi 304

remarks: Manhole cover flange made of Fe; 1 former connection welded shut in the lower bottom of each tank (see pictures)

2645 liter tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 340 x 440 in the front bottom; Test pressure according to the nameplate 2 bar

630 liter tank, AISI 316

notice: some residues of previous content, manhole cover plated

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

1600 liter tank, Aisi 304

notice: some residues of previous content, Metallic discolouration inside remarks: tank with a protective coating outside; dents and smaller cut-offs in the insulation jacket; handhole DN 250; Outlet with flanged...

8640 liter tank, Aisi 304

• Manufacturer: Behälter KG

notice: some residues of previous content, pipe end cut flush remarks: agitator shaft cut off; weldet screws on the tank surface outside (see pictures); 1 pipeline inside; manhole cylinder appr. 340 x 440 mm

8000 liter tank, Aisi 304

remarks: pipelines inside the tanks; in the case of one tank the outlet is cut off; the other tank was re-welded in several places on the central cylinder weld

5000 liter tank, Aisi 304

• Manufacturer: Behälter KG Bremen

remarks: Frame, Aisi 304 (currently 4 wooden blocks are screwed under; see photos); Manhole approx. 345 x 440 mm

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

500 liter tank, Aisi 304

remarks: Slight differences in the design of the tanks; tanks slightly out of round and with smaller dents; tanks do not have a bottom outlet; Feet partly slightly bent; One of the lids has 1 round sheet metal cu...

500 liter tank, Aisi 304

remarks: Tank slightly out of round; Parts of the butterfly valve are lower than the lower bottom (take this into account when setting up the tank); outlet slightly curved upwards; Tank with dents in the transiti...

6000 liter tank, Aisi 304

• Manufacturer: Ritter (HBB Hildesheimer Behälterbau)

remarks: Manhole diameter 420 mm; 1 tank slightly lower in total height; Butterfly valves of the outlets defective; Various pipes on the tanks (mostly cut off)

300 liter tank, Aisi 304

remarks: Tanks slightly out of round (caps do not fit completely on the tanks; 1 x cap knob is missing); Outlet with screwed-on tap (internal diameter of pipe approx. 12 mm); Tank 1: 1 connection is pressed into ...