Used processing in Bremen, Germany

90 liter jacketed processing vessel with anchor stirrer, Aisi 316

• Manufacturer: Behälter KG

Temperature control cylinder (dj): half-coil remarks: support brackets made of mild steel; flanges partly made of mild steel; handhole cover cladded, former connection in the cylinder was welded closed by the for...

Pharma processing skid including 100 liter heat-/coolable pressure tank, Aisi 316

Other: Im Skid verbaut ist eine Alfa Laval Kreiselpumpe, Wärmetauscher, Durckflussventile und diverse Filter. max. allowable working temperature: 165 °C max. allowable working overpressure (dj): 4.0 bar max. allo...

1000 liter stainless steel 316 vessel

• Manufacturer: Holvrieka

remarks: 2 longitudinal sight glasses in the cylinder; outlet fitting (disk tap) incomplete

Brand new 1050 liter heatable/coolable stainless steel 304 fermentation/storage tank

max. allowable working overpressure (dj): 6.0 bar Temperature control cylinder (dj): thermoplate

5500 liter insulated mixing tank made of stainless steel 304

remarks: Agitator drive missing; insulating jacket loose in several places (see photos)

Stainless steel tank 51.4 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, with conical bottoms, propeller agitator in the cylinder below, 3.0 kW, 710 rpm, double jacket around 1/2 cylinder and lower bottom, for 3 bar, 143 °C, ...

Stainless steel tank 26,000 liters

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms, inclined blade agitator eccentric from above, with bottom bearing, approx. 0.19 kW, approx. 90 rpm. Air insulation around cylinder...

Stainless steel tank 20 cbm, insulated, double jacket

• Manufacturer: Sielmann

Design: Cylinder, standing on a frame, 600 x 600 mm door, with conical bottoms, with double jacket around the cylinder and lower bottom, operating pressure 2 bar, insulation around the cylinder, bottoms, and fram...

Stainless steel tank 18.8 cbm, half pipe coil

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, open at the top, with reinforcement edge, an overflow funnel 450 x 470 mm, with a lower conical bottom, half-pipe coil on the cylinder and lower bottom, 2 circuits, design...

Stainless steel tank 6,000 liters

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bases, calculated for 1 bar operating pressure, including brand-new internal heating coil made of pipe 33.7x2.6, heating surface approx. 1.2 m², designed for o...

16000 liter heatable storage tank, Aisi304

remarks: Full pipe coil inside the tank (lower cylinder area) available

1000 liter horizontal pressure tank, Aisi304

• Manufacturer: Duotank

remarks: Plastic manhole cover; tanks are stackable (see photos)

60 liter mobile stainless steel 316 vessel

• Manufacturer: Bolz

remarks: Mobile frame made of stainless steel 304; diameter of hand hole approx. 145 mm; vessel without bottom outlet

4000 liter flat bottom storage tank, Aisi 304

• Manufacturer: Schwarz

remarks: Tanks slightly out of round; outlet is lower than tank bottom (note this during installation); sheet metal cutouts in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos)

60000 liter isolated storagetank, Aisi 304 with propelleragitator

• Manufacturer: Ahlborn

remarks: tank feet are spacers for the substructure/foundation. Small repair areas inside