Used in Hiroshima, Japan

Mutual Sangyo RM-1000
- Manufacturer: 相互産業
Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: 巴工業
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
1989 Taisho Kikai Kogyo HNC-301C
- Manufacturer: Taisei Machine Industry
Casing, rotor: SUS made stator: rubber Honda stator motor interchangeable motor: 2.2 kW Discharge amount: 700 to 2000 L / h * Flow control equipment required separately.
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: Tanabe
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
Four stirrer paddles
Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1
Hiroshima, Japan
SUS tank with coil
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
Elepon Chemical Machinery TVC-020-35
- Manufacturer: エレポン化工機
200V 60Hz 1.5kw 50rpm Power: 1.5kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Asada Ironworks MHK-20
- Manufacturer: Asada Ironworks
Due to long-term storage after maintenance, immediate delivery is not possible, but delivery can be made in a short period of time. Hydraulic unit available Drawings available
Hiroshima, Japan
Tokuju Kosakusho V-200
- Manufacturer: Tokuju Corporation
200L in stock / Total capacity 475L External dimensions: 2500 x 800 x 1950H (mm) Weight: approx. 700kg
Hiroshima, Japan
Tokyo Coki MT-CD-2
- Manufacturer: Tokyo Corki
Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: 共立製作所
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: 巴工業
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan
Tomoe Kogyo AS-26
- Manufacturer: 巴工業
Three-phase separation Rotation speed: 15,000 rpm With startup board Click here to see a video of the trial run when the maintenance was completed (YouTube).
Hiroshima, Japan
1985 Fukoku Industry HX-500
- Manufacturer: Fukoku Industry
Non-humidified type It was used for dehydrating the sweet potato pomace.
Hiroshima, Japan
2007 Mitsuwa Pump Works 3SM (S) -LB
- Manufacturer: Mitsuwa Pump Works
Caliber: 80 x 80 Pumping capacity: 0.88 m3 / min Total head: 8m Shaft sealing method: Double mechanical seal With materials
Hiroshima, Japan