Used gaspardo in Canada

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers

• Manufacturer: JET

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers, (1) Eriez vibratory feeder, valves c/w (2) Warman centrifugal pumps, mod. 75WBH, 100 hp ea. (2nd Loc. Red Zone, Level M)

UV-IR infra-red/UV dryer

UV-IR infra-red/UV dryer, ser. no. 11070 (2015) w/ Eriez feeder, infeed and outfeed chutes c/w Kason vibratory separator, ser. no. M-1047, 1/3 hp

Warman sump-pump

• Manufacturer: Warman

Warman sump-pump, mod. V15F03, 20 hp c/w valves

Holman-Wilfley 8000SD Concentrating Table

• Manufacturer: Holman-Wilfley Ltd

Capacity: Up to 2,500 kgs/Hour (Particle Size Dependent) | Deck type: Single Deck | Deck area: 7.5m² | Deck size: 1,600mm x 4,900mm | Water supply requirements: 20 - 35L/min | Drive: Baldor Electric Motor | Powe...

Knelson KC-CVD32 Gold Centrifugal Concentrator

Continuously Variable Discharge Automated Controls Knelson ICS Independent Control System, See General Specs Below

Denver No. 18 Special Flotation Cells

• Manufacturer: Denver

Manual Cell to Cell Flow Control Gate Naturally Aspirated Sealed Standpipe

Neffco Centrifugal Bowl

• Manufacturer: Neffco

With Feed Trough Electrical Requirements: Overall Dimensions:

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636

• Manufacturer: Hardinge

32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...

Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647

• Manufacturer: Marcy

Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.

Wanted - Knelson Concentrators & Falcon Concentrators

Sepro ISAP 5 Plant

• Manufacturer: Sepro

Consisting of: Feed Chute Fabricated from Mild Steel with Grizzly Bars Sepro Pilot Plant Rotary Scrubber - nominal dimensions 0.75m x 1.5m long. Drum Steel Lifter Bars Rubber Tire Drive Assembly: Wheels Gearbox 2...

29in Dia. Gold Wash Plant

Please contact us for more information. Drum diameter: 29in Screen | Drum length: 4ft Screening Section, 8ft Scrubber Section | Screen opening: 2in x 4in Flat Expanded | Feed hopper size: 4.5ft x 8ft | Cyclone si...

Citic 30ft Dia. x 16ft Long SAG Mill

• Manufacturer: Citic Heavy Industries

General Model Specifications: Size: 30ft Dia. x 16.6ft Long | Mill diameter: 9.15m Dia. (30ft) | Mill length: 5m Long (16.6ft) | Drive: Electric Motor | Power output: 7,500kW | Frequency: 50Hz | Rotation speed: 1...