Used in Wallonia, Belgium

Sample grinder for spectrometer DIETZ, with cup grinding stone

• Manufacturer: DIETZ

Dimensions: Length: 750 mm; Width: 650 mm; Height: 720 mm 2.2 kW; 220/380 V Without water pump – for dry grinding Manual swivelling Height adjustable via crank

Dust filter DONALDSON TORIT DCE ±6000m³/h

• Manufacturer: Donaldson / Torit / DCE

Dimensions: Length: 1100 mm; Width: 1700 mm; Height: 4180 mm Filter area: 141m² (8 cartridges) Electrical data: 9kW; 400/690V; 50Hz; 3-phase With dust bucket (430x430x290mm) on wheels

Dust filter DONALDSON TORIT DCE ±6000m³/h

• Manufacturer: Donaldson / Torit / DCE

Dimensions: Length: 1120 mm; Width: 2000 mm; Height: 4180 mm With dust bucket (Ø 400 mm; 660 mm) with forklift pockets With electric panel With small cyclone With explosion flap for explosive dusts

Wet strength tester for clay bonded sand GF

• Manufacturer: GF

For determining the water resistance of clay-bound sand up to 0.6 N/cm² With heating up to 300 °C With sleeve, ring and base

Electric annealing furnace with railcar H&C FOURS 700°C

• Manufacturer: H&C Fours

Dimensions: Length: 1850 mm; width: 2100 mm; height: 2400 mm Internal dimensions: Length: ±1050 mm; width: ±1050 mm; height: ±1080 mm With CE With bogie car on rails With shelf on trolley

Ladle for melting and holding HINDENLANG 600kg

• Manufacturer: Hindenlang

With control cabinet With Odermath gearbox With suspension for crane transport

Manual sandblasting unit LABOREX

• Manufacturer: Laborex

Dimensions: Length: 1270 mm; width: 1500 mm; height: 2400 mm With exhaust fan and pressure vessel 8 bar max Includes extension rail and collection funnel (for extending the table and collecting the sand)

Ingot 10 trestle for residual liquid for Alu

10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...

Degassing unit (impeller) BOMA

• Manufacturer: BOMA

Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...

Manual sandblasting unit PHIBO INDUSTRIES

• Manufacturer: PHIBO INDUSTRIES

Dimensions: Length: 1300 mm; Width: 1830 mm; Height: 2100 mm Internal dimensions: Ø turntable: 760 mm Cabinet depth: 1250 mm; Door: 940 x 940 mm Max pressure 7 kg/cm² = ±6.8 bar With exhaust fan Includes extensio...

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

Vertical band saw, table 550x550mm, FUHO

• Manufacturer: FUHO

Tiltable table 550 x 550 mm, max part height 400 mm, Infinitely variable speed

Small band saw, brand FLOTT

• Manufacturer: Flott

tilting table In mint condition Cutting height: 160 mm | Cutting speed: 28 and 56 m/min | Motor: 0.45 kW, 680/1360 rpm, 380 V

Chain hoist DEMAG PK5N-F 1000kg

• Manufacturer: Demag
• Model: PK5

220/380V; 1/0.25kW With hook Without plug and control bottle

Chain hoist DEMAG PK10N-F 2000kg

• Manufacturer: Demag
• Model: PK10

220/380V; 1,5/0,35kW With hook WITHOUT plug and control