Used Foundry & Casting in Wallonia, Belgium

Casting ladle 2,5 t, COLLIN

With oil bath gearbox In good condition Outside: width 1900 mm, h. 2000 mm | Inside: Ø 1000 mm, h. 1000 mm | Weight: ± 800 kg

Casting ladle COLLIN, ± 2 t

On 3 feet (Has been used for desulphurisation) Weight: ± 700kg | Outside dimensions: L. 1770 mm, h. 2080 mm | Useful dimensions: 945 mm, h. 990 mm

Casting ladle ACETARC, 7 t

With oilbath gearbox, worm wheel and shaft number 4 With two spouts, without lining

2012 Gravity die casting machine IMR C40H

• Manufacturer: IMR

Dimensions: Length: 2170mm; Width: 1916mm; Height: 1660mm 6KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS control Pressure 45-55bar

Casting ladle UTARD, 2 t, with teapot spout

With gearbox In good condition Inside: 900 mm x 900 mm | Weight: 800 kg

Casting ladle, ± 2,3 t, COLLIN

With with oilbath gearbox With ring of lifting Outside dimensions: 1900mm x 1100mm, h. 2100mm | Useful dimensions: Ø 1000mm, H (without concrete) 1050mm

Casting ladle SOPAME, ± 1 t

With oilbath gearbox With lining Weight: ± 350 kg | External dimensions: 1400 mm x 750 mm, h. 1300 mm | Useful dimensions: Ø 660 mm, h. 770 mm

Gravity die casting machine, Hydraulic 600×400mm

Dimensions: Length: 2500mm; Width: 750mm; Height: 1500mm 3 guides Without hydraulic unit

Casting ladle, 2,8 - 3 t, brand KETTIN THIRIART

Outside: 1850 mm, h. 2000 mm Inside: Ø 1000 mm, h. 1020 mm Weight: 600 kg

2 lifting bails for small casting ladles, ± 60 kg

• Manufacturer: Kleine

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist

Gravity die casting machine BÖCKLE /SPRÖTZE, for aluminium, tiltable

Tiltable 90° With hydraulic unit, control box, electronic time régulation

Rest cast iron molds ±1000kg iron

Outer dimensions: Ø: 1000mm; Height: 470mm Internal dimensions: Ø 760 (top), Ø600mm (bottom), height: 350mm thick-walled

Casting ladle UTARD, 5- 6 t

With oilbath gearbox With 2 pouring spouts With heat protection shield, With steering wheel and air vented band

Gravity casting machine for bronze and brass EOLE

• Manufacturer: EOLE

Clamping plates 200x300 mm With old relay control With immersion basin movable on 3 axes With a tilting and rotating shelf

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...