Used Drilling Rigs

1993 INGERSOLL-RAND DML

• Manufacturer: Ingersoll Rand

4.5 – 5.5 Inch Class CAT 3412 Diesel Engine w/ Only 1,500 Hours Since Rebuild Runs 30ft Drill Steel High Pressure Unit w/ On-Board IR HR2 1050 CFM / 350 PSI New Pump Drive and Double Motor Spur Gear Head

2005 ATLAS COPCO ROC D7-LM

• Manufacturer: Atlas-Copco
• Model: ROC D7 LM

3.5 – 4.5 Inch Class Long Mast 20′ FT Steel Cat Engine Unit is still in use. 2005 Atlas Copco ROC D7-11 LF These Photos were taken March 29th, 2016 when the unit had 5798 engine hours & 1494 percussion hours. The...

2011 FURUKAWA HCR900ES

• Manufacturer: Furukawa
• Model: HCR900ES

2.5 – 3.5 Inch Class HD709 Drifter w/ 1545 Percussion Hours CAT 3126 Diesel engine w/ 3118 Hours Extendable boom Single-Lever Drilling Controls Design Versatility Allows for Drilling either Horizontally or Vertic...

2003 DRILTECH D55SP

• Manufacturer: Driltech

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2020 Soosan JD-800EII

• Manufacturer: Soosan

2009 Atlas Copco ROD D3 RRC

• Manufacturer: Atlas-Copco
• Hours: 4,428 hour

– COP 1840HE Drifter – Radio Remote Control – Cummins Tier III Engine

2005 Sandvik DC300

• Manufacturer: Sandvik

Engine: Deutz-AG BF4L Tier-2 74 HP – Fuel – Diesel Weight 11,023 lbs Self-propelled 4 wheel oscillated drive carrier HL 300 Hydraulic Top Hammer Boom DB300-Articulated Hydraulic Jacks-4 Dust Collector & Water Sys...

2005 Tamrock Commando 300

• Manufacturer: Tamrock
• Model: Commando 300

Engine: Deutz-AG BF4L Tier-2 74 HP – Fuel – Diesel Weight 11,023 lbs Self-propelled 4 wheel oscillated drive carrier HL 300 Hydraulic Top Hammer Boom DB300-Articulated Hydraulic Jacks-4 Dust Collector & Water Sys...

2004 Atlas Copco ROC D7-11

• Manufacturer: Atlas-Copco
• Model: ROC D7-11

– 10,561 engine hours – 3,033 percussion hours – Setup for T45 – COP1840 Drifter

2020 SANDVIK DC130Ri

• Manufacturer: Sandvik

350 Engine Hours 150 Percussion Hours RD106 Hydraulic Drifter CAT C2.2T Engine Excellent Condition

HC200A Hydraulic Drifter

HC200A Hydraulic Drifter / Hammer – Excellent Condition Very low hours since new For use on the Atlas Copco / Ingersoll Rand ECM720

Atlas Copco COP1240

• Manufacturer: Atlas-Copco

Atlas Copco COP1240 Hydraulic Drifter / Hammer For use on the following Atlas Copco Machines: ROC 642 ROC D3 ROC D5 ROC D7 ROC T30

2014 Epiroc PowerROC T50

• Manufacturer: Epiroc

– CAT C9 Tier4 – 492CFM/152PSI Air – COP 3060ME Drifter – Setup for GT60 – 5,245 Engine Hours – Drifter rebuilt at 4,909 hours – New feed motor at 4,100 hours – New feed chain & hose reel sprockets at 4,000 hours...

2011 ATLAS COPCO FLEXIROC T35

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T35

COP1840 Drifter CAT C7.1 TIER 4 Diesel Engine Currently set up for T51 9620 total Engine Hours & 3755 Percussion Hours Holds up to 14″ ft Starter Dust Collector & Water Injections Very Good to Excellent Condition...

2025 SULLIVAN PALATEK D750PH5CU5

• Manufacturer: Sullivan - Palatek
• Model: D750
• Hours: 4,231 hour

Low-Pressure Class Brand New, D750 PH5CU5 series Compressor Cummins QSB6.7 310 hp Available after cooled and filtered if needed 100-150 PSI* Wholesale Pricing

Tamrock Commando 300 Drilling Rig

• Manufacturer: Tamrock
• Model: Commando 300

Good condition Tamrock Commando 300 Drilling Rigs available between 1999 and 2012 years. Located in USA and other countries. Click request price for more information.