New Machine Tools in Gauteng, South Africa

Impact Test Machine TO EN1097-2 (LAG400)

For the determination of resistance to fragmentation This device is used for the determination of resistance to fragmentation. EN1097-2 specifies two test methods, one is the Los Angeles Abrasion Machine (LAG175)...

Micro Deval Machine TO EN1097-1 (LAG180)

Complete with 2 steel drums & steel balls/charges Complete with 2 steel drums 200mm diameter x 154mm long & & steel balls/charges (5kg per drum) Fitted with a revolution counter, which can be pre-set to stop afte...

Nordic Test Machine TO EN1097-9 (LAG380)

For the determination of resistance to wear by abrasion from studded tyres. The test is performed on natural stone & aggregates between 11.2mm and 16mm. The aggregates are rotated in a drum with abrasive steel ba...

Sound Proof Cabinet For Los Angeles Abrasion Machine (LAG173)

With drum safety stop switch on door Image shows Los Angeles Machine before being mounted in cabinet The Los Angles Machine LAG175 is not included and must be purchased separately. Manufactured from sheet steel, ...

Los Angeles Abrasion Machine TO EN1097-2, ASTM C131, C535 (LAG175)

Supplied without abrasive charges to EN 1097-2, ASTM C131, UNI 8520-19, EN 12697-17, EN 12697-43, NF P18-573, UNE 83116 -AASHTO T96, CNR N. 34, NLT 325 EN 12697-43, AASHTO T96 EN1097-2 specifies two test methods,...

Skid Resistance Tester (Original) (LAG190)

For laboratory and in situ road surface testing to EN 1097-8:2009, BS 812 Pt. 114. AS/NZS 4586:1999, BS 6077 Pt 1, BS 7044, BS 7188, BS 8204, BS 7976, EN 1436: 1997, EN 13036-4:2003, ASTM E303 The Skid Resistance...

Skid Resistance And Friction Tester (LAG193)

For site & laboratory use to EN 1097-8, EN 1338, EN 1399, EN 1341, EN 1342, EN 13036-4, ASTM E303, BS 812:114, CNR N. 105, CNR N. 140, NF P18-578, NF P18-575, NLT 174 The Skid Resistance & Friction Tester is suit...

Metal Base Plate For Polished Stone (LAG193/3)

Metal base plate for Polished Stone Value tests in laboratory, and for tests on natural stones and concrete block pavers. To EN 1429. Image shows LAG193/3 together with LAG193/4 Specimen clamping devices are not ...

Micro Deval Steel Drum Without Steel Charges (LAG180/1)

200mm diameter x 154mm long, for use with Micro Deval, 13kg Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Mounted Rubber Slider (Site) (LAG193/1)

• Manufacturer: Goma

Mounted rubber slider, TRL rubber, 76 mm width for site use (road surface), complete with conformity certificate. Due to the continuous development of our products, the goods supplied may vary in detail to that i...

Mounted Rubber Slider (Laboratory) (LAG193/2)

Mounted rubber slider, TRL rubber, 32 mm width for Polished Stone Value tests (laboratory), complete with conformity certificate. Due to the continuous development of our products, the goods supplied may vary in ...

Clamping Device For Polished Stone (LAG193/4)

Laboratory use Image shows LAG193/3 together with LAG193/4 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Bench Top Aggregate Washer (LAG004)

TO ASTM C117 230V 50Hz 1ph Lightweight, bench-top aggregate washer with a capacity of 3.6kg, designed to be located near a sink drain on a laboratory bench top. The easily removable drum measures 229mm in diamete...

Industrial Grinding Machine

Dimensions: 1200 x 1000 x 1600mm