Used Sanders

Trusted Seller
Progress P-200 Dual Arm Spindle Sander/Polisher
- Manufacturer: WeimaLayer PickerProgressKingCantek/Big ToyoKremlinEddaWeinigLoewerC.A.M.A.M.Queen CityGrizzlyVENJAKOB
2 HP motor Dual Arms for sanding, buffing or polishing Canadian made
Montoursville, PA
Larick 260 Profile Sander
- Manufacturer: Larick
The LARICK 260 Series Profile Sander is a horizontal spindle machine designed for use with flexible brush type sanding wheels. The base machine has 40mm diameter spindles extending 175mm on both sides. 50mm diame...
Dundee, NY
Trusted Seller
Timesavers Lynx 37MWT-DB-60 Belt Sander, 2017
- Manufacturer: Timesavers
The Timesavers LYNX is a belt deburring perfect for laser, waterjet or punched blanks. The 31 Series is the most versatile machine that Timesavers offers. This heavy-duty machine can be run up to 2 shifts per day...
Caledonia, WI
Powermatic 35 12” Disk Sander
- Manufacturer: Powermatic
Return To: Sanders Tilt: 45” either way Volt: 115, Ph: 1, Hp: ¾” Equipped With : Control for Outside SN: 835171Good Condition
$1,200 USD
Rochester, NY
Trusted Seller
KALAMAZOO BELT SANDER
- Manufacturer: Kalamazoo
MANUFACTURER: KALAMAZOO INDUSTRIES EQUIPPED WITH GRINDING WHEEL
North Branford, CT
2000 Cemco Sander 2 Heads
- Manufacturer: Cemco
Cemco 2000 Headed Sander 1st head 30HP Rubber coated contact roll 2nd head 25HP Contact pad 37″ Width 75″ Belt length Pneumatic belt tensioning Electronic abrasive belt tracking Variable speed conveyor feed, 15 –...
Randleman, NC
Trusted Seller
Laguna MW25C Metal Wide Belt Sander
- Manufacturer: Laguna
Offering metal deburring, sanding, and texturing, the Compact Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 7.5HP motor (Single Phase), 25″ machine width, and elec...
$16,499 USD
Get financing
Est. $324/mo
Kingston, TN
Trusted Seller
Sunhill ShengShing SDM-15 Open End 15″ Wide Belt Sander
This Sunhill ShengShing SDM-15 15″ wide belt sander has a 15″ width capacity. Since it is open ended you can do up to 30″. 6″ thickness capacity. The 8″ drum is 65 durometer and is powered by a 220V/3-Phase 5 hp ...
$2,600 USD
Kingston, TN
36" GRINDMASTER 2000 SANDER
- Manufacturer: Grindmaster
36" GRINDMASTER 2000 SANDER Model MSB 900 S/N TP1614-11 36” Max width Motorized table height adjustment Digital height read out Electric oscillation Contact roller 2 speed 1800/3600 Variator 4-12’ m/min (fed rate...
Columbia, TN
Trusted Seller
Viet SI-321-2200 (43") 3-Head Wide Belt Sander
- Manufacturer: Viet
Used Viet SI-321-2200 (43") 3-Head Wide Belt Sander 43" x Approximately 6" 20" load space Variable speed feed LED read-out for feed speed Load meters Pneumatic belt tracking and belt tensioning Auto thickness con...
Montoursville, PA
Trusted Seller
Ritter R901 Horizontal Edge Belt Sander
- Manufacturer: Ritter
3 HP Abrasive Belt Drive Motor, TEFC 6″ X 132″ Abrasive Belt Size (2) 6″ X 49″ Ground Steel Platens (2) Bias Tilting 12″ X 65″ Worktables End Sanding Unit with 3″ X 3″ Drum (2) 4″ Diameter Dust Hoods Wired 1-Phas...
$7,190 USD
Get financing
Est. $141/mo
Kingston, TN
Trusted Seller
Ritter R921 Horizontal Edge Belt Sander
- Manufacturer: Ritter
3 HP Abrasive Belt Drive Motor, TEFC 6″ X 132″ Abrasive Belt Size 6″ X 49″ Ground Steel Platen (1) Bias Tilting 12″ X 65″ Worktable (2) 4″ Diameter Dust Hoods Wired 1-Phase 240 Volt, 60 Hz (3-Phase Option R923) D...
$5,690 USD
Get financing
Est. $112/mo
Kingston, TN
Trusted Seller
Oliver 6″ x 89″ Non-Oscillating Edge Sander – 6305
Can be used with the belt in the horizontal or vertical position or any angle in between. Precision ground steel platen is graphite covered to reduce heat. Cast iron table is vertically adjustable allowing full u...
Kingston, TN
Larick 150 Profile Sander
- Manufacturer: Larick
This basic machine fills the need for a lower cost profile sander to sand raised panels, door edges and workpieces that do not require a tilting arbor. It features an inverter controlled 3 phase motor, variable s...
Dundee, NY
Timesavers 37-2 0/B Orbital Sander
- Manufacturer: Timesavers
As taken from service 697 hours on machine Mfg. 1991 (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 3...
$9,250 USD
Get financing
Est. $182/mo
Sheboygan, WI
Heesemann FGA 6 Sander
- Manufacturer: Heesemann
- Model: FGA 6
Good condition Heesemann FGA 6 Sanders available between 1989 and 1990 years. Located in Germany and other countries. Click request price for more information.
Germany