Used Foundry & Casting in Canada

5 Cast Iron Skillets ~10x7

Basement Lot #: 45

2014 NISSEI NEX110III-1E

• Manufacturer: Nissei

THE NISSEI NEX110III-1E IS AN ALL ELECTRIC, HORIZONTAL INJECTION MOLDING MACHINE WITH A CLAMPING FORCE OF 110 USTON (99.79 T). KEY SPECIFICATIONS FOR THIS MACHINE INCLUDE A SCREW DIAMETER OF 16 MM (0.6299") AND A...

Pump belle & gossett model 104306 bell & gossett ecocirc xl 55-45 cast iron circulator #38920

• Manufacturer: Belle

Pump Belle & Gossett Model 104306 Bell & Gossett Ecocirc XL 55-45 Cast Iron Circulator 104306 Bell & Gossett Ecocirc XL 55-45 Large Wet Rotor Circulator with 1/2 horsepower, 208-230/1/60. The newly expanded ecoci...

Warren Cast Iron Globe Valve – 3″

• Manufacturer: Warren

Warren Valve’s line of Cast Carbon Steel Globe Valves are an economical and quality choice for oil and gas refineries as well as petrochemical plants. Features: Fully rebuildable Proven Design (2) Valves availabl...

BEARDSLEY & PIPER 2016 MATCHBLOMATIC

• Manufacturer: Beardsley & Piper

Beardsley & Piper 2016 Matchblomatic, S/N 317-7312, with Controls, Hydraulic Pump 16" x 20".

40ft Office Building

Two additional buildings attached. Pasc condition rating: C | Skidded: No | Connection status: Connected | Building type: Office | Building width: 40ft | Building length: 40ft | Building dimensions: 40ft40ft | Bu...

CookRite 3-Ring Gas Low Stock Pot Range w/ Cast Iron Burner

CookRite 3-Ring Gas Low Stock Pot Range w/ Cast Iron Burner GAS OR PROPANE MODELS Features: - CookRite Low Stock Pot Stove - gas - (1) three-ring cast iron burner - full width removable stainless steel drip...

HYDRO-O FLEX TRAILER DUMP

- Built in 1994 - Back on style - 65' long deck x 10" wide - 50 ton capacity - 63 degree tilt angle - Two (2) hydraulic cylinders (chrome plated) - Hydraulic Power Unit (575/3/60) - Hopper c/w twelve (12) strand ...

TOSHIBA 250 hp, 4000 volts, 713 rpm, D509Z AC Induction Motor – Motors Electric Motors AC/DC – AC , 250 hp, 4000 volts, 3-phase , 713 rpm, D509Z

• Manufacturer: Toshiba
• Model: DC250
• Phase type: Three-phase

Current type: AC | Horsepower: 250 hp | Voltage: 4000 volts | Phase: 3-phase | Rpm: 713 rpm | Frame: D509Z

Used Allen-Bradley Variable Frequency Drive, 7.5 HP, 460-600V

• Manufacturer: Allen-Bradley

15 in Cast Iron Intake Strainer

15 in. outside flange. (4) 1 in. bolt holes.

Cast Iron Peristaltic Pump Rotor – Fluid Handling Equipment

• Manufacturer: LENMARK INDUSTRIES

Inner diameter: 7" | Material: Cast iron