Used cispr

Rohde & Schwarz ESR3

• Manufacturer: Rohde & Schwarz
• Model: ESR

Details The Rohde & Schwarz ESR3 combines an EMI test receiver and spectrum analyzer into a single device with a 3.6 GHz range and 9 kHz EMI reception, expandable to 10 Hz. It features CISPR 16-1-1 Ed. 3.1 compli...

ETS Lindgren 4825-2

Details The ETS Lindgren (EMCO) 4825-2 LISN is a two-line, low pass, filter network used for conducted emissions measurements. The product is placed between the power mains and the equipment under test (EUT) to s...

Rohde & Schwarz ESVS10

• Manufacturer: Rohde & Schwarz
• Model: ESVS10

Details The Rohde & Schwarz ESVS10 EMI Test Receiver supports compliance with CISPR16-1, VDE0876, and ANSIC63.2 standards, covering a level measurement range from -14 dBmV to +137 dBµV. With a frequency resolutio...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Rohde & Schwarz ESL3 EMI Test Receiver

• Manufacturer: EMI

Details The Rohde & Schwarz ESL3 is an EMI Receiver and Spectrum Analyser covering 9kHz to 3GHz, equipped with a tracking generator and various weighting detectors including Min/Max Peak, RMS, quasi-peak, and CIS...

Rohde & Schwarz ESIB7

• Manufacturer: Rohde & Schwarz
• Model: ESIB7

Details The Rohde & Schwarz ESIB7 EMI Test Receiver features a frequency range from 20 Hz to 7 GHz, with exceptional sensitivity (NF typ. 10 dB), low noise (<–3 dBµV), and broad dynamic range. It supports fast sc...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

Rohde & Schwarz ESPC

• Manufacturer: Rohde & Schwarz
• Model: ESPC

This unit has been designed for use in electrical and electronic industries to cover all stages of development and production, it offers a compact and economical solution in particular for development accompanyin...

Rohde & Schwarz ESR26

• Manufacturer: Rohde & Schwarz
• Model: ESR

Rohde & Schwarz ESR26 Details Rohde & Schwarz ESR26 The R&S ESR is an EMI test receiver for the frequency range from 10 Hz to 26.5 GHz and complies with the CISPR 16-1-1 standard. It measures electromagnetic dist...

Rohde & Schwarz ESIB7

• Manufacturer: Rohde & Schwarz
• Model: ESIB7

Rohde & Schwarz ESIB7 Details Rohde & Schwarz ESIB7 20 Hz to 7 GHz EMI Test Receiver Each R&S ESIB combines the high sensitivity, large dynamic range and selectivity of a high-end EMI test receiver with the flexi...

Rohde & Schwarz ESVS10

• Manufacturer: Rohde & Schwarz
• Model: ESVS10

Rohde & Schwarz ESVS10 Details Rohde & Schwarz ESVS10 Rohde & Schwarz ESVS10 EMI Test Receiver Comply with CISPR16-1, VDE0876 and ANSIC63.2 Level measurement range -14 dBmV to +137 dB MicroV For measurements to E...

Anritsu ML428B

• Manufacturer: Anritsu
• Model: ML428B

Anritsu ML428B Details Anritsu ML428B The Anritsu ML428B not only enables measurement of the field strength of general broadcasts and radio communications, but it can also perform measurements of interference wav...

Rohde & Schwarz ESI26

• Manufacturer: Rohde & Schwarz
• Model: ESI26

This EMI test receivers combines the flexibility and speed of spectrum analyzers with the large dynamic range required for EMI measurements in conformance with standards. ESI carries out measurements in conforman...

Rohde & Schwarz ESVD

• Manufacturer: Rohde & Schwarz
• Model: ESVD

Rohde & Schwarz ESVD Details Rohde & Schwarz ESVD Rohde & Schwarz ESVD EMI Test Receiver, 20 MHz - 1 GHz (2 GHz) The R&S ESVD Test Receiver is equally suitable for the measurement of signal strength and interfere...