Used Studer Machine Tools

CYLINDRICAL GRINDING MACHINE STUDER S-40-2

• Model: S40
• Grinding length: 600 mm

Manufacturing origin Swiss Voltage 380/50/3 Netweight 4050 kg Custom position 8460.2920 Dimensions 280x200x210cm : Centre height 175 mm Between centres 650 mm Longitudinal slide Max travel dist.between c...

CYLINDRICAL GRINDING MACHINE STUDER S30-1

• Model: S30

Inventory no. 2230022, equipped with : 1 Workpiece headstock MT5 1 Grinding headstock 1 MT3 tailstock with male center MD MT3 1 Heidenhain ND 730 2-axis digital readout 1 Adjustable dressing device on tailstock ...

2002 STUDER S21 Lean

• Manufacturer: Studer
• Model: S21
• Grinding length: 400 mm

Machine serviced and partially overhauled. -New grinding spindle bearing -New x-axis spindle -Upper table ground over -New table geometry -New WSS geometry for grinding spindles B-axis with 1° Hirth coupling Long...

STUDER DSA

• Manufacturer: Studer
• Model: DSA

Dressing diameter: 75 - 250 mm | Flank angle: 0 - 180 ° | Rotation speed: 2800 t/min | Diameter: 100 mm | Width: 550 mm | Bore: 20 mm | Voltage 50 hz 3x: 380 Volt | Total installed power: 0.35 kW | Machine's wei...

WHEEL-FLANGE FOR STUDER S-30

• Model: S30

GRINDING WHEEL FLANGE STUDER S30

• Model: S30

flange Ø 175 mm wheel bore 127 mm taper 45 mm

GRINDING WHEEL FLANGE STUDER S30

• Model: S30

flange Ø 175 mm wheel bore 127 mm taper 63 mm

WHEEL-FLANGE STUDER S40-2

• Model: S40
• Grinding length: 600 mm

Flange Ø 258 mm with wheel bore 60 mm taper 62 mm and height 125 mm

GRINDING WHEEL FLANGE STUDER S30

• Model: S30

flange Ø 175 mm wheel bore 127 mm taper 63 mm

WHEEL-FLANGE STUDER S40-2

• Manufacturer: Studer
• Model: S40
• Grinding length: 600 mm

Flange Ø 258 mm with wheel bore 60 mm taper 62 mm and height 125 mm

1999 STUDER S36 Favorit

• Manufacturer: Studer
• Model: S36
• Grinding length: 540 mm

In 2015, Studer overhauled the spindle head, tailstock, and workpiece table. In 2024, Studer replaced the X+Z axis drive. The system included a coolant system with a magnetic roller, a workpiece spindle, a tails...

EXTERNAL AND INTERNAL CYLINDRICAL GRINDER “STUDER” S40-2

• Manufacturer: Studer
• Model: S40
• Grinding length: 600 mm

Inventory nr. 2324015, machine equipped as follows 1 STUDER external and internal cylindrical grinding machine Type S40-2, completely retrofitted Distance between centres 1600 mm 125 mm centres height New electri...

1987 STUDER S20-2

• Manufacturer: Studer
• Model: S20
• Grinding length: 1,000 mm

Geometrically outdated and repainted With internal grinding setup Accessories on request The machine can be inspected while powered at the customer's site from 2025 through January 2026.

2005 STUDER S33

• Manufacturer: Studer
• Model: S33
• Grinding length: 1,500 mm

This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2005. It features a dynamic balancing unit, Marposs push button insert, and includes 2 CBN grinding discs. The machine also comes with appro...