Used Bottling Lines in Netherlands

Pharma Packing Bottle Filling Line, Model 8-1 VitaCount

• Manufacturer: Pharma Packaging System

Pharma Packing Bottle Filling Line, Model 8-1 VitaCount Used Pharma Packaging System bottle filling line consisting of: - Accumulation feed table, stainless steel construction. -Pharma Packaging Systems lane cou...

Karges Hammer AGR 100

• Manufacturer: Karges Hammer

Tooling: 127 mm | Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 100 mm | Can shape: round | Speed (up to): 350 ends per minute

Lomasa compound liner

• Manufacturer: Lomasa

Tooling: 108 mm | Can shape: round

IMC 196 / 5-ML

• Manufacturer: IMC

Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 325 mm | Can shape: round | Speed (up to): 45 ends per minute

Industrial can manufacturing line D73

Pre-owned very well maintained can making line consisting of: Soudronic VAA K 50 welder with CAN MAN static convertor (YoM 2020), Mecatronic lacquering unit for inside and outside type VXL-IMA and curing oven and...

2000 Shin-I S-A17A

• Manufacturer: Shin-I

Pre-owned compound lining machine with vertical drying oven running on ELECTRIC and heating up to 70 gr Celsius. Machine is like new, only used for testing by TATA Steel IJMUIDEN.

1974 FMC 586

• Manufacturer: FMC

Tooling: 83 mm | Can shape: round | Speed (up to): 200-250 ends per minute

1974 FMC 586

• Manufacturer: FMC

Tooling: 83 mm | Can shape: round | Speed (up to): 200-250 ends per minute

1995 IMC compound liner

• Manufacturer: IMC

Quality pre-owned lining machine. Tooling: 127 mm | Can shape: round | Speed (up to): 150 ends per minute

Biagosch & Brandau DRS G-12

• Manufacturer: Biagosch & Brandau

Quality pre-owned dual lining machine. The Gunstar is Bibra's machine type for lining of round products with a speed of up to 400 ends per minute, depending on the product diameter. The ends coming into the machi...

Lomasa compound liner

• Manufacturer: Lomasa

Tooling: 100 mm | Can shape: round

1979 FMC 586 W

• Manufacturer: FMC

Tooling: 127 mm | Can shape: round | Speed (up to): 300 ends per minute

Schuler MGua 175

• Manufacturer: Schuler

Tooling: 99 mm | Can / ends diameter minimum: 48 mm | Can / ends diameter maximum: 163 mm | Can shape: round | Speed (up to): 150 ends per minute

GRACE FMC 586

• Manufacturer: FMC

GRACE FMC used automatic high speed single lane lining machine to apply water base compounds to tinplate or aluminium ends or round curled aerosol dome bottoms or aerosol cone tops.

1987 Littell LM1E coil cutting line

• Manufacturer: Littell

Pre-owned cut-to-length line for cutting tinplate. The line consist of a Coil Car, Uncoiler, Leveller (straightener), mirror inspection, pinhole detector, shear, 4 stacking boxes (pilers).