Used Machine Tools in Saxony, Germany

WMW milling head

• Manufacturer: WMW

Milling head , Drilling head , Angle head WMW, WEMA Engelsdorf UA1 Rotatable 360° in two levels Hollow shaft (drive): Ø 28 mm, wedge width: 6 mm used, checked!

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

GÜHRING sealing plug

• Manufacturer: Guhring

Sealing plugs, 6 pieces GÃHRING GM300 4985 63,000 16136705 used, tested!

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

OVERBECK shaft clamping cylinder

• Manufacturer: Overbeck

Shaft clamping cylinder OVERBECK MM0WL000028 New! Diameter: Ø 24 / 30 / 85 / 63 / 25 mm | Length: 73.5 / 65 / 14 / 26.5 / 82 mm | Total length: 261 mm | Dimensions: 261 x 85 x 85 mm

MMZ1335

Rotary feedthrough, inlet DEUBLIN DD RTR FLG 2620-500-252 Like new!

Ku294

Metal bellows coupling, bellows coupling PAGUS Ø 40 / 42 mm 6-corrugated bellows New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 89-15483 with thrust bearing and additional shift ring New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch, multi-plate clutch ORTLINGHAUS COUPLINGS Factory no. 39 used, tested! Â

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 4 - TGL 42398 used, tested!

POLO filter technology Coolant treatment

• Manufacturer: POLO

Coolant processing, inclined bed filter with magnetic filter POLO filter technology Inclined bed filter: SB-A0.4 Magnetic filters: MAF-0150 50Hz used, tested!

PAGUS V-belt pulley

• Manufacturer: Pagus

V-belt pulley, stepped pulley PAGUS Ã 299 - 351 mm Shaft length: 75 mm, groove width: 10 mm Material: Aluminum (pulley), steel (hub) used, tested !