Used Machine Tools in Saxony, Germany

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, buttstock, fixed PAGUS Used! Inner diameter: Ø 350 mm | Center height: 460 mm | Foot: 540 x 200 mm | Hole distance: 330 mm | Counter pressure plate: 410 x 210 mm | Dimensions: 850 x 220 x 960 mm

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drill, drill, 22 pieces IND-SPHINX® PRECISION LIMITED Type 546 54600012000850000 Ã1.20x8.50mm Other quantities on request! New!

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

WMW clamping technology set

• Manufacturer: WMW

Clamping tool set, tool holder, reducing sleeve , center point WMW 2 x fixed center point SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long Used!

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

BO319

Column drilling machine; Column drilling machine WMW BS25 MK3 Motor: Elektromotorenwerke Thurm KR100,2/4-2 380V 3AC 50 Hz 3.7/4.95 A 1.420/2.830 rpm. tested, checked !

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

WMW drill

• Manufacturer: WMW

Twist Drill WMW Ø 69 mm x 425 mm HSS Used! Total length: 425 mm | Spiral length: 230 mm | Morse taper: MK5 | Dimensions: 430 x 70 x 70 mm

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!