Used Machine Tools in Saxony, Germany

TCT micro drill

• Manufacturer: SUB-MICRON TECH CO. LTD.

Micro drill, head drill, drill, 10 pieces TCT, SUB-MICRON TECH CO. LTD. UCCP series 0.20*3.5 Other quantities on request! New!

TCT micro drill

• Manufacturer: SUB-MICRON TECH CO. LTD.

Micro drill, head drill, drill, 10 pieces TCT, SUB-MICRON TECH CO. LTD. MD series 0.105*1.5 Other quantities on request! New!

MPK Micro Drill

• Manufacturer: Pagus

Micro drills, head drills, drill bits, 50 pieces MPK Type SX30E SX30E-2700105-0 Other quantities on request ! New !

WMW clamping technology set

• Manufacturer: WMW

Clamping tool set, tool holder, reducing sleeve , center point WMW 2 x fixed center point SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long Used!

BO319

Column drilling machine; Column drilling machine WMW BS25 MK3 Motor: Elektromotorenwerke Thurm KR100,2/4-2 380V 3AC 50 Hz 3.7/4.95 A 1.420/2.830 rpm. tested, checked !

BO322

Column drill press ZMM METALLIK PAZARDJIK MK20 Vise: Motor: ELPROM A0100L8/4 0.7 / 1.1 kW 720 / 1430 rpm 380 V 3AC 2.5 / 3.2 A Used, tested!

PAGUS drive unit

• Manufacturer: Pagus

Drive unit ( without motor ) for tool chuck PAGUS Ø 80 mm Flange diameter: Ø 104/80 mm, depth: 12 mm 4x threaded hole: M6 x 1.0, depth: 10 mm 4x threaded hole: M5 x 0.8, depth: 10 mm Drive unit with pneumatic cou...

BARRY air spring

• Manufacturer: BARRY CONTROLS GmbH

Air spring, machine base BARRY CONTROLS GmbH SLM-48 Internal thread: M14 x 2.0, depth: 20 mm used, checked!

WMW service unit

• Manufacturer: WMW

Service device, machine control WMW SERVICE DEVICE III AUERBACH Fkr SRS 250/1 (AUERBACHFkrSRS250 /1) approx. 6 m connecting cable Similar to illustration! Used!

POREBA upper slide

• Manufacturer: Poreba

Top slide with 4-fold tool holder POREBA 4-fold steel holder, 2 pieces used !

PAGUS mechanical clutch

• Manufacturer: Pagus

mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21/25 mm 4 grooves Spare part and others. for milling machine FRITZ WERNER FV1! Used!

BO323

Catch hole drilling and pinning machine WESSEL FSM 220 V 50 Hz 0.1 kVA used

Gang drilling

Row drilling machine, 4-fold BKR 20x4 AI thread cutting possible ! used, tested !

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !