Used stackers

SABILA 1500x4mm CTLL (Used) #4916

• Manufacturer: SABILA

€ 260.000 1500mm x 4mm / 20ton Flying shear type - speed: 14m / minute INSTALLED & UNDER POWER Line footprint: about 20m x 10m Decoiler Coil loading saddle Peeler station Leveler Flying shear Evacuation...

F&P 12mm CTL Lines (New) #3395

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Lines 2100mm x 12mm HR, Galv., Pickled Steel CUSTOM DESIGNED -- 12m / 10 Tonne Sheet Stacker Speed max. 30m / min -- The process material -dry or oiled- is: galvanized, pickled st...

F&P 1500mm Multi-Blanking & "Combo" Lines #4915.1

• Manufacturer: Floreani & Partners

< LT15 < a) LT25 -- b) 5ton decoiler -- c) tension pad, recoiler and coil off-loading car < a) various details -- b) example of loop pit equipment -- c) a coiled strip < LT25 details --- click and then click...

cut to length

INTRODUCTION ［Uncoiling Unit ］ ［Leveler ］ ［Feeder and Shear］ ［Stacking Unit］ Cut to Length Line A cut to length line is generally used for jobs like uncoiling, straightening, measuring, cross-cutting to length an...

3x1600 OSCILLATING CUT TO LENGTH LINE

I. GENERAL SPECIFICATION 1. INPUT MATERIAL 2. PRODUCTS 3. SPEEDS 4. OTHERS II. DETAILED SPECIFICATION 1. COIL SKID Note : Coils of diameter less than 900mm should be stocked directly on the coil car 2. COIL CAR 3...

1500mm x 3mm Bonak Loop Cut to Length Line with Electromagnetic Stacker

• Manufacturer: Bonak

Coil Weight 20 tons Width 1550 millimeters Thickness 3 millimeters Manufacturer: Bonak Line Direction: Right to Left Line Speed: 120 m/min Thickness Range: 0.4mm to 3mm Coil Width Range (Entry and Exit): 150mm...

76" x .100" x 72K AUTOMATIC FEED TRAPEZOID CUT-TO-LENGTH LINE - UPGRADE 2020

• Manufacturer: AUTOMATIC FEED COMPANY

LINE OVERVIEW: THIS IS AUTOMATIC FEED COMPANY TRAPEZOID CUT TO LENGTH LINE HAD A MULTIMILLION DOLLAR CONTROLS, MOTOR AND STACKER UPGRADE IN 2020 BY AUTOMATIC FEED COMPANY THE LINE IS RUNNING AND IN OPERATION I...

72" x .125" x 64,000# BRONX MULTIBLANKING LINE

Make: Bronx / Alcos Material: CRS, Galv, Stainless, Satin Coat, Aluminum Material Width: 8" - 72" Weight: 64,000 Lb ( entry turnstile 40,000Lb) Material Thickness: .020" - .125" Coil ID: 20" - 24" Coil OD: 72" Yi...

60" (1525MM) x .078" (2.0MM) x 30,000#(15 TON) DREHER CUT TO LENGTH LINE, NEW

• Manufacturer: Dreher

Manufacturer - Dreher Year - 2007 Strip width - 8"-60" (200mm-1525mm) Coil capacity - 30,000# (15 ton) Strip thickness - .015"-.078" (.4mm-2.00mm) Flattener - 9 Rolls w/ 2 pinch rolls (11 total rolls) Shear SPM -...

60" x .375" x 40,000# AUTOMATIC FEED CUT TO LENGTH LINE

Serial #: 3831 General Specifications: Width Range: 4.75"-60" Gauge Range: .094-.375" (.500" at 30") Yield= 60,000 PSI Coil ID: 22"-26" Coil OD: 72"-36" Pack Weight 10,000# Pack Height 21" Line Speed= 78' FPM ...