- Trusted Seller
Tensile testing machine MOHR&FERDERHOFF 20t
used
- Manufacturer: Mohr
Brand: Type: UPD20 Traction machine dimensions: length: 1100mm; width: 1300mm; height: 2500mm Hydraulic dimensions: length: 700, width: 800mm; height: 1800mm With 2 chuck and sample boxes With extensometer With h...
Amel, Belgium - Trusted Seller
2015 Cutter for test samples STRUERS
used
- Manufacturer: Struers
- Model: Discotom-10
Dimensions: width 1050mm, depth 940mm, height 680mm (lever 860mm) For cutting discs Ø 230 x 2mm, bore Ø 32mm With pneumatically activated plexiglas protection cover With original metal underbench STRUERS With wat...
Amel, Belgium - Trusted Seller
Mobile Hardnesstester for Interiors/ borings EMCO-TEST ROCKWEL
used
- Manufacturer: Emco
Dimensions: Lenght: 550mm; Witdh: 140mm; Height: 90mm manual indication load level 625HRC The reading after measure is taken from dial gauge in HRC With Diamant and spring joint
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
1968 Tensile testing machine WOLPERT W30, 30 t
used
With hydraulic unit Useful dimensions (hydraulic block): 1120 mm x 720 mm, h. 1660 mm Older version, in very good condition Without sample clamping system
Amel, Belgium - Trusted Seller
Hardness tester FIE RA ROCKWELL
used
- Manufacturer: Rockwell
For ROCKWELL tests with diamant cone 120 ° Weight: ± 110mm | Dimensions: length 500mm, width 260mm, height 650/1430mm | Ø table: 50mm | Dimensions table: 610mm x 500mm | Support plate: Ø 50mm | Useful height: 216...
Amel, Belgium - Trusted Seller
Sand strength tester GF
used
- Manufacturer: GF
With 1 pair of pressure test jaws With pressure gauge Last inspection 2023
Amel, Belgium - Trusted Seller
1965 Hardness tester WOLPERT, HT 2 S
used
Serial number: 4898Construction year: 1965Weight: ± 350 kgDimensions: 740 mm x 500 mm x 1560 mm , (feet 350 mm)With ball 3 mmPression: 250 kgFor ROCKWELL test according to DIN 51304With 3 interchangeable table to...
Amel, Belgium - Trusted Seller
Polisher grinder STRUERS Ø300mm
used
- Manufacturer: Struers
Dimensions: Length: 510mm; Width: 700mm; Height: 450mm 200/240V; 50/60Hz With water injection
Amel, Belgium - Trusted Seller
Wet strength tester for clay bonded sand GF
used
- Manufacturer: GF
For determining the water resistance of clay-bound sand up to 0.6 N/cm² With heating up to 300 °C With sleeve, ring and base
Amel, Belgium - Trusted Seller
Sand strength tester GF
used
- Manufacturer: G+F
Brand G+F With 1 set of pression jaws Weight: ± 20 kg | Dimensions: length 630 mm, width 210 mm, height 220 mm
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
Hardness tester ERNST, ball Ø 2,5mm, electronic
used
- Manufacturer: Ernst
Electronic display, 16 Bit Height adjustment by hand crank Semi-automatic unit for BRINELL, ROCKWELL and VICKERS Can be connected to computer or printer Prints posisble in 5 languages
Amel, Belgium - Trusted Seller
Sand strength tester GF SPDR
used
- Manufacturer: G+F
Brand G+F With 1 set of pression jaws Weight: ± 20 kg | Dimensions: length 630 mm, width 210 mm, height 220 mm
Amel, Belgium - Trusted Seller
Samples polishing unit BUEHLER
used
- Manufacturer: Buehler
- Model: Minimet
With speed regulator and timer Weight: ± 15 kg | Outside dimensions: 450mm x 180mm, h. 180mm | Motor: 220V (mono)
Amel, Belgium
Tip: Enter manufacturer, model or keyword
