Used Ball Mills in California, USA

Mill, Ball, 8' X 6', Marcy, 250 HP, #S484980

• Manufacturer: Marcy

Marcy 8' diameter x 6' long ball mill with trunnion feed and discharge. Rubber liners and lifters. Last used in a wet grind application. Previously driven by 250 HP motor thru gear & pinion. Gears good. Lots of w...

Mill, Ball, Batch, 4' X 5', Fiedler, Porcelain, #Z485823

• Manufacturer: Fiedler

Fiedler pebble mill 48" diameter x 60" long (interior dimensions), with running & discharge door, Unit less V-belt to pinion & bull gear drive (less motor), Mounted on stand. Outside dimensions - 11' long x 5' wi...

Mill, Ball, Batch, 3'6" x 4'6", Porcelain, Pebble #S744317

Ceramic lined 40" diameter x 54" long pebble mill, 52-gallon, porcelain-lined. Driven by approximately 20 HP, 460/230 Volt, 3/60 Hz motor thru v-belt assemblies on motor sheave and drum sheave with belts turning ...

Mill, Ball, 11' x 14.5', Dominion, No motor #D740103

• Manufacturer: Dominion

Dominion 11' x 14.5' Ball Mill. Includes the mill shell, bull gear, trunnion, feed liner, pinion, bearings, and gear covers but no motor.

Mill, Ball, 2'6" x 4'6", Denver, 10 HP, Steel Liners #S744260

• Manufacturer: Denver

Denver 30" Diameter x 54" long Ball Mill with steel liners and ball charge. Incudes 16" x 12" infeed hopper at 57" feed height and 17" diameter overflow discharge. Mill is driven by 10 HP, 1175 RPM, 460 V, 3-phas...

Mill, Ball, Batch, 3' x 32", Paul O Abbe, 5 HP, C/st #S738884

• Manufacturer: Paul O. Abbe

Paul O'Abbe ball mill, 32" diameter x 36" long (inner measurements) mounted on stand. Unit is carbon steel contacts, jacketed for water cooling. Unit has 9-1/2" x 8" door. Unit has 9-1/2" x 8" door. Includes 5 HP...

Mill, Ball, 21.75' x 43', ANI, 10,000 KW, Double Pinion, #D740108

• Manufacturer: ANI Mineral Processing

Unused ANI Mineral Processing Ball Mill, 21.75' x 43', double pinion drive includes (2) 5,000 KW motors. Manufactured in 2001. Wet overflow discharge type. Designed to grind material at a dry rate of 325 MTPH. In...

Mill, Ball, Rod, 13' x 18'8", Nordberg-Mesto, 1500 HP Motor #5991238

• Manufacturer: Symons - Nordberg

Nordberg 13' x 18'8" (4m x 5.7m) rod/ball mill, originally manufactured in 1969 and refurbished in 2016. Serial Number GM 438, it features a single-piece shell, feed and discharge-end trunnions, and liners. The m...

Mill, Ball, 8" X 50", Vibratory, Palla, Mdl 20U, #L741301

• Manufacturer: Palla

Humbolt-Wedag Palla Vibratory Ball Mill, Model 20U - Measures 8" in diameter x 50" long. Mounted on a stand. Was a demonstration unit for trade shows (no motor included). Serial number 20181.

32" x 27" Vicentini Pebble Mill, S/S

• Manufacturer: Vicentini

32" x 27" Vicentini Pebble Mill, S/S Used 92 gallon Vicentini pebble mill, model M41317, stainless steel contact surfaces, 32" diameter x 27" long drum, belt driven, on stands with approx. 1 HP motor drive, built...

Mill, Ball, Batch, 3'9" X 4', Paul O Abbe, No Motor, #D739650

• Manufacturer: Paul O. Abbe

Paul O. Abbe Model 4A pebble/paint mill, 3' 9" (1.14 m) x 4' (1.22 m), ceramic lined, batch type mill. Total mill volume: 251 gallons. Mill speed: 27 RPM when 50% full of pebbles or porcelain balls, missing hatch...

Mill, Rod, 9.5' X 13', Marcy, #D734871

• Manufacturer: Marcy

Rod mill, 9.5' diameter x 12' long, manufactured by Marcy, formerly driven by 600 HP motor and gear reducer (less drive assembly). Formerly used steel liners. Includes Herringbone gear 332 teeth, 19 teeth pinion ...

Mill, Rod, 9.5' x 12', Hardinge, No Motor #D740099

• Manufacturer: Hardinge

Hardinge-Koppers Rod Mill, measures 9.5' x 12'. Includes set of bull gears and set of pinion gears on shafts, mill pillow block bearings, gear guards. Does not include liners or motor. Spare bull gear, pinion gea...

Mill, Batch, 3' X 6', 15 HP, #D739651

Tumbler batch mill, 3' X 6', driven by a Baldor 15 HP, 1765 RPM, 254T frame, 230/460 volts motor with a Dodge Maxum gear reducer model DC84, Output RPM: 108, Ratio 17:1. Includes Spur Cut bull gear with78 teeth a...

Mill, Impact, TAS, C/st, 350 HP, Mdl 42B (2) #S516500

• Manufacturer: TAS

Carbon steel mill, impact, TAS, carbon steel, 350 hp, mdl 42b (2). (2) Vertical shaft impact mill, Theory Application Service (TAS) Model 42B with 350 HP vertical v-belted electric motor drive. Mill has a 42" dia...