New Bending & Forming in Gauteng, South Africa

Unsymmetrical bending (FL 160)

symmetrical and unsymmetrical bending on a beam Description: Symmetrical bending of a beam – also known as uniaxial bending – occurs when the load plane coincides with one of the main axes of the beam cross-secti...

Bending elasticity in rotors (TM 620)

investigation of bending vibrations in rotors Description: Critical speed and resonance are phenomena that play essential roles in many machines and systems. In particular, resonance states with impermissibly hig...

Assembly of bending device (TZ 200.11)

GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...

Free vibrations in a bending beam (SE 110.58)

natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...

Beam on two supports: bending moment diagram (WP962)

application of the method of sections to determine the bending moment Description: WP 962consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point t...

Deformation of bars under bending or torsion (WP 100)

elastic deformation of statically determinate or indeterminate beams under bending load Description: Bending and torsion are typical loads to which components are subjected. The resultant stresses and deformation...

Cold Test Bending Machine (UTM-8400)

Product Codes: UTM-8400 Cold Test Bending System, 150 kN Description: UTM-8400 Cold Bending Machine is used for bending and re-bending tests of reinforcing bars, wire rod and wire for concrete in accordance wi...

Beam on two supports: shear force & bending moment diagrams (WP960)

Application of the method of sections to determine internal reactions of the beam Description: Statics observes the effect f forces on a rigid body, ignoring any possible deformations which may occur in the proce...

Forming by bending (FT200)

Bending Device (TZ200.01)

Assembly of Bending device (TZ200.11)