Used Shell And Tube Heat Exchangers in United Kingdom

7.9 Sq.m S/S Shell & Tube Heat Exchanger

Stainless Steel Shell & Tube Heat Exchanger with about 50 tubes 28 mm OD x 1800 mm long shell 100 mm dia 2 off 75 mm dia 2 off 50mm dia Flange connection. With Stainless Steel end caps with 50 mm connections with...

72 Sq.m S/S Shell & Tube Heat Exchanger

Stainless Steel Shell 7 Tube Heat Exchanger with a bout 280 tubes 28 mm OD x 2925 mm long shell has 310 mm dia , 150 mm dia and 4 off 50 mm dia connection. With Stainless Steel end caps with 500 mm connections wi...

0.427 Sq.m Stainless steel shell and tube heat exchanger

Stainless steel hair pin tubes to give two pass with 3 off 19 mm OD x 1,194 mm long [ needs mild steel outer shell. Please note at extra cost we can offer Stainless Steel outer shell] 70 mm dia tri clamp in/ outl...

26 Sq.M. S/S Shell & Tube Heat Exchanger

S/S Shell & Tubes, M/S End Caps. 80 Tubes 30 Dia. 3300 mm Long. Shell Has 200 & 2 X 25 mm Connections, End Caps 38 & 2 X 25 mm. 2 Pass. Shell Working Pressure 30 Psi Or Full Vacuum, Tubes 45 Psi

27 Sq.M. S/S Shell & Tube Heat Exchanger

Stainless Steel Tubes With Mild Steel Shell With 145 Tubes 20 mm Od. X 3050 mm Long. No End Caps. Shell With 100 mm Connections. Test Pressure 150 Psi.

42 Sq.M. S/S Shell & Tube Heat Exchanger

Stainless Steel Tubes Mild Steel Shell With 286 Tubes 19 mm O.D. X 2450 mm Long. Single Pass. One End Cap With 160 mm Dia Connection. Other With50 & 43 mm Dia. Connection. T.P. Shell 110 Psi. Tp.P. Tubes 65 Psi. ...

8 Sq.M. S/S Coiled Tube Heat Exchanger

Stainless Steel With Mild Steel Jacket. 600 mm Dia. X 1350 mm Tall. Dish Top & Bottom To 32 mm Outlet. Top With 100 mm Dia & 3 X 25 mm Dia Inlets.With Approx 8 Sq.M. Stainless Steel Internal Coil.

19.6 Sq.M. S/S Shell & Tube Heat Exch.

All Stainless Steel Contact Parts But Mild Steel Backing Flanges. 43 X 25 mm Dia Tube 2400 mm Long Hair Pins. Top Connections 2 X 225 mm Dia, 1 X 50 mm. Bottom 1 X 32 mm. End 2 X 38 mm Dia. Overalal Dimensions 29...

MBS MLW 88 10 16 1 6000 CD BA

• Manufacturer: MBS
• Capacity: 5,000 l/hour

Tubular Heat Exchanger consisting of 6 x tubes in series, mounted to a box section frame. Was previously used for cooling Yoghurt from 34 degC to 10 degC at a flowrate of 5,000 l/hour. Maximum viscosity 100 cps. ...

Actini S/S Tube Type Pasteuriser Up to 1300LPH

Stainless steel Actijoule 30 kw pasteuriser with 30 tubes 25 mm dia x 1,500 mm longwith 26 tubes recovery up and recovery down stream, with 14 tube cooler Previous duty beverage product 1,300 LPH heating to 85 de...

3.7 Sq.M. S/S Coiled Tube Condenser

460 mm Dia. X 700 mm Deep. Dish Top & Bottom With 100 mm Dia. Outlet.Top 50 mm Dia. Inlet. 2 X Side 100 mm Dia. Connections. Stainless Steel 25 mm O.D. Coil. 3 Rows 20 Turns. Capacity 115 L.

38 Sq.M. S/S Chemtec Evaporator Column

Stainless Steel With 127 Tubes. 60 mm O.D. X 1600 mm Long. Tubes W.P.+6/-1 Bar. Shell +8/-1 Bar. Modell 1.443 Sh11. Made In 1985. Over All Size 1660 mm Dia X 2150mm Tall

12 Sq.M. S/S Coiled Tube Condenser

Stainless Steel 800 mm Dia X 1425 mm Tall. Dish Top & Bottom. 100 mm Dia. In/ Outlet. Side 150 mm & 265 mm Connections With 50 mm O.D. Internal Coil.

Pasteuriser Holding Tube (Approx 20 Seconds)

• Capacity: Approx. 8,000 l/hour (20 seconds)

Capacity (l/hour): Approx. 8,000 l/hour (20 seconds) | Frame material: Stainless steel | Connections: 2"