Used Grinding Machines in Saxony, Germany

Trusted Seller
STANKO sanding block attachment
- Manufacturer: Stanko
Sanding block attachment STANKO Spindle: Ø 70 mm, length: 250 mm Carriage: Stroke: 90 mm Guide pin. Ø 30 x 11 mm Motor: VEM KR 90.1/2 1.1 kW 2860 rpm 220 / 380 V 3AC 50 Hz used, tested !
$878 USD
Zschepplin, Germany
Trusted Seller
NORTON + 3M, broadband
- Manufacturer: Norton
Wide belt, non-woven belt, sanding belt, 14 pieces NORTON, SAINT-GOBAIN, 3M 1380 x 2620 mm 6x NORTON R822 P60 666233 30855 width: 1380 mm, length: 2620 mm 2x NORTON R822 P80 662610 97631 width: 1380 mm, length: 2...
$2,048 USD
Zschepplin, Germany
Trusted Seller
2002 Ewag ewamatic line
- Manufacturer: Ewag
- Model: EWAMATIC LINE
Renewed in 2016 This is the Ewag has some oil on the glass scale. dirty glass scale The Ewag Ewamatic Line is a high-precision grinding machine designed for the production and re-sharpening of tools, particular...
Leipzig, Germany
Trusted Seller
Mikromat SFW 200x600/PA2
- Manufacturer: Mikromat
- Model: SFW 200
Manufacturer: Mikromat Model: SFW 200x600/PA2 Specifications: - Total Mass: 1.6 tons - Circuit Diagram: - Main: 3405-9900/00/03 - Auxiliary: 3405-9900/00/04 - Temperature Range: - Operating: 10–40°C - Power Re...
Leipzig, Germany
Trusted Seller
Peter Wolters AL1000
- Manufacturer: Peter Wolters
Peter Wolters AL1000 Two-disc fine grinding machine, hydraulically operated Disc diameter, outside Ø 1010 mm, inside Ø 310 mm Rolling device: Type 28/5 optional 6 Rotor disc, type T28, number 5, optionally 6 ...
Leipzig, Germany
Trusted Seller
SEW hand grinder
Hand grinder, flexible shaft, flexible shaft SEW S2198 used, tested ! tool dimensions 160 x 32 x 20 mm
$410 USD
Zschepplin, Germany
Trusted Seller
WMW double sanding block
- Manufacturer: WMW
Double sanding block WMW Type ST300 Bj.: 1970 | Disk-drm.: 300 mm | Power: 1,1 kW | Dimensions: 750 x 420 x 1200 mm
$445 USD
Zschepplin, Germany
WINTER CHIPPER KNIFE GRINDING MACHINE GRINDER 1700 CAR - MAGNETIC PLC
Technical data: - max. working width 1700 mm - automatic working X-axis - automatic adjustment of Z-axis with servo motor and PLC control - magnetic clamping table 200 x 1700 mm - grinding angle +/- 90 - grinding...
$14,628 USD
Get financing
Est. $287/mo
Leipzig, Germany
1999 Double bench grinder from Güde
- Manufacturer: Güde
Double bench grinder made by Güde Double bench grinder made by Güde Serial no. 5858253 - Switch defective
Markkleeberg, Germany
1985 VIOTTO HOV1VHD
- Manufacturer: Viotto
Further information: disc grinder Type of control: Konventionell | Control: N/a
Halberstadt, Germany
1973 DISKUS DDS 300 R
- Manufacturer: Diskus
- Model: DDS 300
Further information: Discuss - surface grinding machine
Halberstadt, Germany
1969 GEORG MüLLER MPS 2
- Manufacturer: Muller
- Model: MPS 2
Further information: - Grinding movement (stepless) Manual
Halberstadt, Germany
1990 TITAN RU 350 x 1-1500
- Manufacturer: Titan
Type of control: Konventionell | Max. grinding length: 1.500 mm | Max. workpiece weight: 300 kg | Grinding diameter: 350 mm | Max. dia. of grinding wheel: 280-500 mm | Grinding wheel width: 80-100 mm
Halberstadt, Germany
1988 KELLENBERGER 600 U - Nr. 40
- Manufacturer: Kellenberger
- Model: 600U
Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm...
Halberstadt, Germany
1974 Mikromat SFW 200x600
- Manufacturer: Mikromat
- Model: SFW 200
The machine was used for dry grinding. -very good condition -without dressing device -dust extraction -machine lamp
Leipzig, Germany