Used Cnc Lathes in Lombardy, Italy

2007 WICKMAN 1" 3/8 -6 CNC Lathe

• Manufacturer: Wickman

Multi-spindle automatic lathe 6 spindles Bar diameter: Independent slide: 0 – 89 mm Hexagonal block feed travel: 0 – 89 mm Hexagonal block approach travel: Normal: 89 mm – Special hexagonal: 63 mm Transverse sli...

GIANA GFP 14 x 2500 CNC LATHE

• Manufacturer: Giana

Retofitted in 2023. Complete with: - n. 1 hydraulic selfcentering chuck Ø 800 mm. - n. 2 automatic square turrets - chipconveyor - full guard

PBR T 800 x 2000 CNC LATHE

• Manufacturer: PBR

Complete with: - n. 1 x 12 positions turret - n. 1 automatic square turret - n. 1 four jaws table Ø 1.500 mm. - n. 1 three jaws self centering chuck Ø 800 mm. - safety protections

GILDEMEISTER NEF 710×3000 Cnc lathe with flat bed

• Manufacturer: Gildemeister
• Model: NEF 710

Used GILDEMEISTER NEF 710×3000 flat bed cnc lathe Used GILDEMEISTER NEF 710×3000 flat-bed cnc lathe is a sturdy medium-large CNC lathe with parallel bed, equipped with ECS 2401 cnc; complete with quick-change man...

2007 DIAMOND SJ 22 2-axis cnc lathe

Used DIAMOND SJ 22 2-axis cnc lathe Used DIAMOND SJ 22 2-axis cnc lathe is a fast CNC lathe with inclined bed and flat guideways 2 axis medium size, and it is equipped with FANUC 0i-TC cnc, year of construction 2...

Multi-spindle lathe TORNOS SAS 16 DC

• Manufacturer: Tornos
• Model: SAS16DC

Multi-spindle automatic lathe Bar diameter: Maximum feed length: 63 mm Maximum length of turned part: 52 mm Number of spindle speeds: 16 Spindle speed (settable by PLC): 1200-8000 rpm Maximum radial slide travel:...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Round: 14 mm - Square: 10 mm - Hexagonal: 12 mm Max feed length: 75 mm. Spindle: Number of speeds: 16 - Spindle revolutions: 900-6000 rpm. - Production cycles: no. 22 Production c...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Max feed length: 75 mm. umber of speeds: 16 - RPM: 900-6000 rpm - Production cycles: 22 Production cycle range: pieces per minute 4.9 to 72 - seconds per piece 12.2 to 0.84. No. 6...

1995 TSUGAMI BS20 cnc lathe (BE)

• Manufacturer: Tsugami
• Model: BS20

Automatic cnc lathe with sliding headstock. Numerical control Citizen Cinicom SYSTEM VD. Bar length 2500 mm. Material bar diameter 6-20 mm. Max turning length 200 mm. 12 Tools: No. 3 back drilling. No. 3 front dr...

HARDINGE CONQUEST T42L motorized 3-axis cnc lathe

• Manufacturer: Hardinge
• Model: Conquest T42

Used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe The used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe is a rugged and precise CNC lathe with an inclined bed of medium size, turning length about 700mm,...

2013 POLYGIM DIAMOND 42 CSL sliding headstock cnc lathe

• Manufacturer: Po Ly Gim

Used POLYGIM DIAMOND 42 CSL sliding headstock cnc lathe The used POLYGIM DIAMOND 42 CSL sliding headstock cnc lathe are a medium-sized 5-axis CNC machine particularly suitable for automatic lathes, in bar machini...

1986 STAR MOD. cnc lathe JNC 16

Automatic cnc sliding headstock lathe Turrets: Diameter: 16 mm. Max bar feed: 160 mm. Max bar feed with synchronized sleeve: 95 mm. Spindle speeds: 375 - 7,500 rpm. Drive motor power: Devices and Accessories: Acc...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

6 spindles. Max bar passage: Max feed length: 75 mm. Spindle: No. 22 production cycles. . Range of production cycles: (parts per minute) 4.9 to 72 - (seconds per part) 12.2 to 0.84 Fixed cam ratio with cross slid...

L. PONTIGGIA 3 QG 750x15500 THREE SLIDES BED CNC LATHE

• Manufacturer: Pontiggia Leopoldo

Complete with: - n. 1 four jaws table Ø 1.200 mm. - n. 1 automatic square turret - n. 1 closed steady - n. 4 open steadies - n. 1 boring support

Mori Seiki Lathe Zl150 SMC

• Manufacturer: Mori Seiki
• Model: ZL-150SMC

n. 1 Mori Seiki lathe model Zl150 SMC, year 2000 - ref. 1- Complete with Iemca Bar Loader Model Boss 545/32L year 2003It is noted that the lathe's CNC does not start due to a fault (likely board failure)CE Declar...