Building Filters
Scandicci, Italy
C.L.O.M.E.A. AT0004
- Manufacturer: C.L.O.M.E.A.
AT0004 Manual equipment to drive angle-shaped profiles.
Scandicci, Italy
C.L.O.M.E.A. PAF100M
- Manufacturer: C.L.O.M.E.A.
PAF100M Profile filler to compact the sand by means of vibrators to be applied directly to the bar.
Scandicci, Italy
Scandicci, Italy
C.L.O.M.E.A. ES40
- Manufacturer: C.L.O.M.E.A.
ES40 Equipment to extract the filling strips from the profile, supplied with roller bench.
Scandicci, Italy
C.L.O.M.E.A. PA02
- Manufacturer: C.L.O.M.E.A.
PA02 PVC runner to support the stretched winglet (only for mono-run bending).
Scandicci, Italy
Scandicci, Italy
C.L.O.M.E.A. PA01
- Manufacturer: C.L.O.M.E.A.
PA01 PVC runner kit to contain the stretched winglet, including washers for the alignment with the rollers.
Scandicci, Italy
C.L.O.M.E.A. AT0005
- Manufacturer: C.L.O.M.E.A.
AT0005 Equipment to better contain the profile and improve its dragging.
Scandicci, Italy
C.L.O.M.E.A. AT0001
- Manufacturer: C.L.O.M.E.A.
AT0001 Manual lower fourth roller to better contain and drag the profile.
Scandicci, Italy
Scandicci, Italy
C.L.O.M.E.A. PIM
- Manufacturer: C.L.O.M.E.A.
PIM Software and Hardware with manual input of the bar-feeding speed, to allow the execution of very short radii and to work on short arcs.
Scandicci, Italy
C.L.O.M.E.A. CN11
- Manufacturer: C.L.O.M.E.A.
CN11 Numerical control with Linux operating system for multiple-run machining up to 3 radii. Single bar-feed speed, automatic management of the fitting sections and bar check. Network connection and remote assist...
Scandicci, Italy
C.L.O.M.E.A. CN33
- Manufacturer: C.L.O.M.E.A.
CN33 Numerical control with Windows 10 operating system for multiple and single-run machining up to 49 radii. Import of .DXF files, schemes for the roller assembly and the filling strips insertion. Two bar-feed s...
Scandicci, Italy
C.L.O.M.E.A. CR40
- Manufacturer: C.L.O.M.E.A.
High performance hydraulic bending machine for metal and plastic profiles. Machine body in cast iron, gears in hardened steel and three steel driving shafts, mounted on conical bearings and controlled by a gearmo...
Scandicci, Italy