Used in Friuli Venezia Giulia, Italy

BLISS 450 ton

• Manufacturer: Bliss

Ton: 450 | Table - width (mm): 2760x1400 | Number of strokes / min: 20-120 | Subtype (dm / cdc): DM | Ce mark: No | Slide - stroke (mm): 150 | Drive system (eccentric / link motion / knucle joint / hydraulic / s...

SCMB MULLER 500 ton

• Manufacturer: Muller
• Stroke length: 250 millimeter

Ton: 500 | Table - x (mm): 1200 | Slide - stroke (mm): 250 | Table - width (mm): 1200 | Frame (h/c): H FRAME | Conditions: WORKING | Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly): ...

TMP VORONEZ 800 ton

• Manufacturer: TMP VORONEZ
• Stroke length: 320 millimeter

Ton: 800 | Table - x (mm): 2470 | Slide - stroke (mm): 320 | Table - width (mm): 2470 | Frame (h/c): H FRAME | Inspection: 2003 | Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly): ECC...

Peeling machine CALOW S-125

• Manufacturer: CALOW

Loading table Feeding roller conveyor with motorized height regulation Entry pinch-roll – n°4 rollers at the vertical axis Peeling machine comprising: Front bar guiding system hydraulically controlled Peeling h...

Polishing/straightening unit RIPO SCHUMAG 0B

• Manufacturer: Schumag

Feeding pinch-roll Polishing/straightening unit RIPO Exit pinch-roll Main motor Local push-buttons panel New tooling Supports for tubes guide Straightening unit with n°5 and n°7 bushings

Peeling machine CALOW S-100

• Manufacturer: CALOW

Loading table Feeding roller conveyor Peeling machine CALOW S-100 Exit carriage Exit roller conveyor – Not available Main motor Chips evacuating belt conveyor Electric cabinet with Inverter Hydraulic power...

Shot blasting machine Carlo Banfi Verbor 8

• Manufacturer: CARLO BANFI S.P.A.

Total power installed: 200 kW approx. | Productivity: 6-10 coil/h. | Weight of the coil: Max. 2000 Kg. | Coil diameter: Øi 850 mm. - Øe 1450 mm.

Pointing machine for tubes

• Manufacturer: POVAZSKE STROJARNE

Working range: Øe 5 - 50 mm. - Thickness: 2 mm. | Motor power: Hydraulic unit 7,5 kW | Tension: 400 V. - 50 Hz.

BULL-BLOCK 5-20

-Pre-straightener -Push pointer with die holder -Capstan -Tiltable re-coiler -Layer winding spooler -Electric equipment -Hydraulic equipment -Drawings and documentation available

POLISHING/STRAIGHTENING UNIT SCHUMAG RIPO 3B

• Manufacturer: Schumag

Working range: Ø19-45 mm. | Motor power: 2 X 75 kW a.c. | Tension: 400 V. - 50 Hz.

POINTING MACHINE KROLLMANN DWU-3 SFL

• Manufacturer: KROLLMANN

Working range: Ø 3 – 15 mm. >1000 N./mm2 Ø 5 – 18 mm. <500 N./mm2 | Pointing axle: Horizontal + shear | Motor power: 4 kW | Tension: 380 V. - 50 Hz.

Combined drawing machine SCHUMAG KZRP-3B

• Manufacturer: Schumag
• Model: KZRP

Double tiltable decoiler Coil opener Horizontal + vertical pre-straightener Push-pointer Draw bench Straighteners H + V Hydraulic impact shear Conveying through Two rolls straightening machine SCHUMAG 2-W...

Combined drawing machine SCHUMAG KZRP-2A

• Manufacturer: Schumag
• Model: KZRP

Draw bench Straightener H + V Flying-shear Conveying through DANIELI RIPO polishing unit Main motor and electric cabinet Tooling available (pulling jaws, rollers, cutting knives and bushing) Drawings available

Two rolls straightening machine BRONX PBR-8 RF

• Manufacturer: Bronx

Loading table Feeding channel – push type Straightening machine Exit channel N.2 Gearbox + motors Rollers transmission shafts Drawings and spare parts available Electric cabinet is missing

Two rolls straightening machine KIESERLING WRPH-95

• Manufacturer: Kieserling
• Model: WRPH

Loading table Feeding channel Feeding pinch-roll Straightening machine Exit pinch-roll Exit channel Hydraulic unit N.2 Gearbox + motor Rollers transmission shafts Original electric equipment Drawings and spare pa...