Used Processing in Saxony, Germany

3M-Matic 700a-E Type 39600 (9789) carton sealing machine for top and bottom sealing with adhesive tape

• Manufacturer: 3M
• Model: 700A

3M-Matic 700a-E Type 39600 (9789) carton sealing machine for top and bottom sealing with adhesive tape, upper and lower belt drive system, carton size range in mm length 150 - ~, width 150 - 550, height 120 - 650...

Dreher Delta 20/40 granulator for the size reduction of injection mouldings or hollow plastic bodies with a medium cross-section

• Manufacturer: Dreher

Dreher Delta 20/40 granulator for the size reduction of injection mouldings or hollow plastic bodies with a medium cross-section, rotor diameter 200 mm, working width 400 mm, 3 rotor blades and 2 stator blades, i...

Aquatherm WLR 11 water chiller

• Manufacturer: Aquatherm

Aquatherm WLR 11 water chiller, cooling medium water, cooling capacity 1.1 kW based on an ambient air temperature of 27°C and a water inlet temperature of 15°C, coolant R12, electrics 220V/1 Ph/50Hz, power consum...

planetary gear SP180, i=100

i=100 further information on request Update: last 07/30/2021

2006 HMS / Sander

• Manufacturer: HMS / Sander

CdS coating system, 50kW, 3 x 400 V, consisting of: 1 "Sander" unwinding unit, 1 inlet, 1 CdS coating chamber, 2 neutral zones, 1 cascade rinse, 3-way, 1 drying section, 1 "Sander" winder, 1 supply cabinet, for a...

1992 Gessner 1CB 0206 B101

• Manufacturer: Gessner

Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the executi...

OTTO KLEIN compressed air tanks

Pressure vessel, compressed air tank with holder OTTO KLEIN SHEET STEEL PROCESSING OKS 486315 RST372 used, tested !

2003 FHR RC 200-2B

• Manufacturer: FHR

CIGS system/strip coating system for coating foils with copper, indium, potassium and selenium, strip width max. 200 mm, strip length max. 500 m, coating capacity 200 kW, connected load 60 kW, with control cabine...

1996 EFD MINAC 15 m/Cooler

• Manufacturer: EFD

The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and s...

2007 IVA INDUSTRIEOEFEN IVA 844 060/4

• Manufacturer: IVA INDUSTRIEOEFEN

MULTI-PURPOSE CHAMBER OVEN LINE Application: for heat treatment of small parts and piece goods, intended for the following heat treatment processes such as -hardening under protective gas -annealing, normalizing,...

2006 KKW RIEDEL PLB-S5HWE

• Manufacturer: KKW RIEDEL

Cooling of industrial processes Application = water cooling Water tank capacity 210 liters Refrigerant R22 Air intake via 4x mechanical air filters (750 x 750mm) 2x exhaust fan via ceiling Ø 500mm External operat...

2012 PadeltTherm HEU 9196/700

• Manufacturer: Padelttherm

Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of l...

PREBENA Aerotainer Case System: Mobile Compressor + Pressure Tester with Accessories

Manufacturer: Prebena • Range: Aerotainer 240 Plus / Aerotainer Twin Devices in the set: • Oil-free piston compressor (portable in case, 230 V, up to 8 bar) • Pressure test/storage device (with pressure gauge, ho...

NABERTHERM 41SH

• Manufacturer: Nabertherm

Maximum temperature 1280 °C Power 15 kW Combustion chamber approx. 340 x 500 x 250 mm Nabertherm 41SH hardening furnace (used) – Item B17804 This used chamber and hardening furnace from the manufacturer Naberther...

2018 Belüftungsanlage IGETEC AG-500

Item Description/Artikelbeschreibung: Lot consists of: (1) Belüftungsanlage, (1) Outdoor Ventilation Unit. (1) Duct Silencer, (1) throttle Control, (1) Chiller Unit Position besteht aus: (1) Ventilation System, (...