Used Processing in Canada

Lightnin Mixer

• Manufacturer: Lightnin

-Manufacturer: Lightnin -IDENT NO: 809018 PSP -Volts: 115 -Cycle: 50/60 -Phase 1

Mixer with Stainless Prop

• Manufacturer: Baldor - Reliance

-Shipping dimensions: 120" length x 42" wide x 27" height -Each blade is about 22" long -Baldor Motor -3 Hp -575 volt

Hibon rotary lobe blower

• Manufacturer: Hibon

CATEGORY: Blowers/ fans Model SNH822 Serial 16170200 125 hp, 460 volt belt drive 3000 cfm @ 13"

GAST Regenerative Blower

• Manufacturer: Gast

-Manufacturer: GAST MFG Corp. -Blower: Model, R1102 -CFM OPEN 60/50 Hz -SN: 0592 -At 60 Hz: -Max pressure: 28.5 in H2O -Max Vacuum: 26.5 in H2O -At 50 Hz: -Max Pressure: 21 in H2O -Max Vacuum: 20 in H2O -Inlet/ o...

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Read co. Continuous Mixer

• Manufacturer: Read

-master motor:1/3 HP -1 Phase -.4 AMPS -1725 RPM -115 v -z blades

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

590 Litres Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

0.33 HP Clamp-on Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 3/4" -Baldor Reliance Motor: -HP: 0.33 -Volts: 230/460 -Amps: 1.6/0.8 -RPM: 1725 -Hz: 60 -Phase 3

Sasso Flat Stone Equipment

• Manufacturer: Sasso
• Model: Flat

Good condition Sasso Flat Stone Equipment available between 2015 and 2020 years. Located in USA and other countries. Click request price for more information.